Codec Channel Operation - Axia element v.2.0 Installation & User Manual

ing the options provided when constructing the Source
Profile for your hybrid. This automatic switching mode
makes it very easy to prep callers and then seamlessly
put them on the air with a minimum of button pushes.
(See Chapter 3).
Channels configured for Phone sources can be turned
on and off remotely, and will provide on/off status to a
remote logic device.
Remote Preview
as are lamp drivers for
On, Off
pulses can be sent when the channel is turned on
Stop
or off, respectively. See Chapter 4: Configuring GPIO
for information interfacing to GPIO inputs and outputs.

Codec Channel Operation

The Codec Channel is used for codec sources. Like
the Phone Channel, each codec source is brought up on
its own channel, and an individual Feed-to-Source (mix
minus) output is provided for each codec. Codec Chan-
nels can be turned on and off remotely and provide on/
off status to a remote logic device.
are also provided, allowing talent to take
Remote Mute
control using their own On/Off/Mute/Talk panels.
enables remote talent to communicate with the
Talk
board op using the
Talkback
vated, all outputs for that channel are muted and the
source audio is fed to the
key lights, and its Status Symbol displays
Talkback
T. When the user stops talking, the channel returns to
normal, and its
Talkback
alerting the board operator to the guest who spoke to
him, and enabling him to reply using the
When the remote mute function is activated, the Sta-
tus Symbol displays M, and all the channel outputs are
muted until the command is released.
The mix-minus output normally feeds
audio to the remote, but can be switched to
The Feed-to-Source output on a Codec Channel is a
dual mono output, occupying both sides of the stereo
pair. The Left output is normally used for remote talent's
headphone feed, and is interrupted by
when the board op talks to the remote. The Right output
is also provided,
and and
Preview. Start
and
Remote Talk
bus. When is acti-
Talk
bus; the channel's
Talkback
key flashes for three seconds,
key.
Talkback
Program-1
Program-2
audio
Talkback
©2016 Axia Audio- Rev 1.8.1
sends uninterrupted program audio (without talkback)
for use as a PA feed.
What's Next
One of Element's most powerful features is the abil-
ity to instantly reconfigure the entire surface for differ-
ent show types. All fader assignments, monitoring pref-
erences and other console settings that may be related to
a specific show or function are easily "recalled" by your
operator.
Join us in Chapter Six to learn how to set up and use
Show Profiles.
.