Axia element v.2.0 Installation & User Manual page 42

To prevent a source from appearing on these inputs'
selection lists, uncheck the desired box. Generally
speaking, normal sources such as computers and CD
players will have fader assign capability only while
sources such as off-air receivers will have monitor-
only capability.
About Mics and Headphone Feeds: Element
provides you with several headphone options,
all selectable from Element's Monitor Mod-
ule. The Monitor 1 (control room) headphone
output provides a feed intended for the Host
(board-op's) mic position and includes the abil-
ity to monitor the Preview bus in headphones.
Guests can talk to the host directly using the
Talkback keys on their remote control panels.
The Monitor 2 headphone output sends au-
dio to talent and guest mic positions. Talent
positions include a talkback channel that the
host or board op can use to communicate us-
ing the Talk To Monitor 2 function (guest
positions do not have this Talkback channel).
An individual headphone feed can also be con-
structed to associate a dedicated headphone
channel with a specific mic. This allows the
board op to send individual, targeted talkback
to a specific individual (using the Talkback
keys) without other talent or guests hearing.
Define your source as a micro-
•
SOURCE TYPE:
phone, a line input, a telephone input, a codec or a
computer source.
is the board operator's mic. It is the
»
Operator
source mic for Element's
button serves as a
On
associated logic mutes the CR monitors when
is used for in-studio Producer's
»
CR Producer
mic positions. It has associated GPIO logic which
can operate
Talk to...
producer's panel. It also mutes CR monitors
when
On.
is used for any other guest mic in the
»
CR Guest
control room. Its associated logic port mutes the
CR monitors when
headphone feed.
is used for any mic located in a
»
Studio Guest
separate studio. Its logic mutes the Studio moni-
tors when . It can have an individual head-
On
phone feed.
functions. Its
TALK TO
button. Its
COUGH/MUTE
On
functions from a remote
. It can have an individual
On
©2016 Axia Audio- Rev 1.8.1
is used for any line input audio source, ana-
»
Line
log or digital. A GPIO logic port can be used to
provide machine start/stop pulses if desired.
defines this source as a hybrid or broad-
»
Phone
cast phone system input. A summed mono mix-
minus is automatically provided.
marks this source as a codec. A dual-mo-
»
Codec
no mix-minus is provided; one PA feed (right) +
one talent feed with talkback (left).
»
Computer Player
nating from a PC. Associated GPIO logic can be
used to send start/stop signals to a playout system.
Defines fader start actions and states:
•
Fader Mode:
conforms to the US method of requiring
»
Normal
talent to manually turn the channel on and off.
»
Fader Start
standard of activating the channel and associated
machine logic when the fader is raised from ∞.
»
Fader Start with Arm
setting when the fader is not set to minimum
mal
position. When the fader is set to the minimum
position, it can be in an
state is entered by pressing the ON But-
Armed
ton when the fader is down. The armed state
means that the channel will go to the
when the fader is moved up. When in
the channel OFF lamp will be illuminated. The
channel ON lamp will flashing in "wink" mode -
a long on-time and short off-time.
.
For all fader modes, pressing the
any time will place the channel in the
About Telos Phone System Modes: Telos
multi-line broadcast phone systems work in
two different modes: US Mode and Euro
Mode.
In US Mode, one of the phone system's hy-
brids is assigned to a console faders, and tak-
ing a caller to air is accomplished by using a
switching control to select a line on that hybrid
and turning its fader ON.
In Euro Mode, the switching control is not used;
instead, each line from the phone system is per-
manently assigned to a separate fader, which
defines this source as origi-
follows the common European
works just like the
state.
Armed
ON
Arm
button at
OFF
OFF
Nor-
state
state,
state.