Group Start Screen
Figure 6-11: The Group Start assignment map
There may be times when you'd like to have a single
keypress activate multiple faders for convenience' sake:
interview shows with multiple guests, election coverage
comprising multiple incoming remote lines, in-studio
performances. Element's Group Start function lets you
designate one or more faders as a Master Fader, and one
or more as a Slave Fader. When a Master fader is turned
or
, the Slaves turn
On
Off
Master of your domain: In the case that you
have designated more than one fader as a Mas-
ter, turning any of the Master faders On or Off
will also operate any other Master faders, as
well as any Slave faders.
Figure 6-4 illustrates how a Group Start map might
look. The grid allows you to designate each fader on
your console as either
Master, Slave
(normal operation).
Note that making a change in this screen also chang-
es the value of the Group Start setting in the fader's
Channel Options screen (described previously in this
chapter), and vice-versa.
and
as well.
On
Off
or
Independent
©2016 Axia Audio- Rev 1.8.1
Phone Screen
The Phone screen is used when you're setting up a
Telos TWOx12, Series 2101 or Nx12 talkshow system for
use with Element. The options in the screen are detailed
fully in Appendix D: Working With Phone Hybrids;
please refer to that chapter for details on setup. If you
do not have a Phone Module installed, this screen will
be empty.
Save and Exit:
button applies any changes made to
•
Save Changes
the Auxiliary Send Description and returns you to
the Show Profile Settings menu.
•
Back to Show Profile
Profile Settings without saving changes.
What's Next
Chapter 7 explores the use of the powerful Virtual
Mixer (VMIX) capabilities, which allow you to create
custom mixes of networked sources and use them like
you would a single audio source. We will also discuss
VMODE which is a section that allows you to manipu-
late mono sources in many useful ways. Grab a cold one
and let's dive in.
link takes you back to Show