Axia element v.2.0 Installation & User Manual page 146

• Network Address
dress is automatically assigned during boot-up.
: Do not change - this value is auto-
• Netmask
matically assigned during boot-up.
: Do not change - this address is auto-
• Gateway
matically assigned during boot-up.
• Syslog Server and Severity Filter
tion also includes the syslog server IP address
and syslog level settings. Under certain circum-
stances, Axia tech support may request that you
collect logs of system activity. Otherwise, the
syslog settings should be left at default settings.
• User Password:
changed here. Be sure to record any changes
you make to the default user password (which is
blank). It is difficult for anyone to help you out
if the password is not known.
Be aware that making changes to device pass-
words after your PathfinderPC server has been
configured is going to make your life more com-
plicated. We encourage you to make password
changes at the beginning of your setup or leave
the passwords at the default value.
• Firmware Version
will update the firmware for the Switch section
of the PowerStation. As with most other Axia
devices, there is provision for two different ver-
sions of firmware. The Switch will reboot when
the version is changed.
What's Next
Congratulations! There's no test at the end of this
manual, but if there was one you'd surely pass it. There
is more great information on specific topics in the Ap-
pendices - feel free to check them out too.
If you have spotted any errors or omissions in this
manual, we want to hear about them so we can make
necessary changes in the next manual update. Thanks
for your participation and thanks for choosing Axia.
: Do not change - this ad-
: This sec-
The user password may be
: This section is where you
©2016 Axia Audio- Rev 1.8.1
Fig. 10-10: PowerStation MAIN Switch - System