Audio I/O Subsystems - Axia element v.2.0 Installation & User Manual

»
Serial Number:
ber.
: "OK OK" indicates that the
»
Power1 Fuse1
power supply of the PowerStation MAIN is OK
and that its fuse is also OK.
: "OK OK" indicates that the
»
Power2 Fuse2
power supply of the PowerStation AUX is OK
and that its fuse is also OK.
• Remote Access Password
word may be changed here as well however we
recommend you use the main system page for
that function.
• Configuration Management
you make backups of and restore your Engine
settings. Use the
buttons to accomplish these actions. Use
store
the button to reset all of your settings
Reset Cfg
to an "as-shipped" state. This command will
completely erase any choices you have made and
reset your PowerStation's Engine to the way it
came from the factory, so use with caution!
: The PowerStation may be rebooted re-
• Restart
motely from this screen if necessary.
• Hardware and Firmware
in use is displayed in the Hardware box. New
firmware updates are processed in this screen.
Remember that since the PowerStation has inte-
grated the Element with the MixEngine, there is
a single, combined firmware update.
» Use the field and the
File
buttons to upload new software to the Engine.
» Pressing the
Commit
in Bank 1 and loads it into Bank 0, which opens
Bank 1 for new software.
» You can run PowerStation software from either
Bank 0 or Bank 1. Simply click on the radio but-
ton next to the software bank you wish to run
from, and click
Apply Selected Bank
system will reboot after changing banks, so plan
this operation for off-hours or switch program
output to another studio to avoid program inter-
ruptions.
Diagnostics
This section of the PowerStation MixEngine is de-
signed to create local diagnostics reports and to deliver
Reports the CPU serial num-
: The HTTP pass-
: This section lets
, and
Browse Backup Re-
: The type of CPU
and
Browse Upload
button takes the software
. The
©2016 Axia Audio- Rev 1.8.1
real-time logging to an external Syslog Server. This area
is used under guidance from Axia Tech Support.

Audio I/O Subsystems

The PowerStation family has two audio I/O subsys-
tems - one is associated with the PowerStation MAIN
and the other identical I/O subsystem is a part of the
PowerStation AUX. Both units are normally accessed
from the web pages of the PowerStation MAIN.
Note that the IO Subsystems currently have their
own password system. The default user name is "user"
and the user password is blank.
Sources and Destinations:
The basics of Sources and Destinations have been
thoroughly discussed in Chapter 2: Element with Pow-
erStation. That information will not be repeated here.
GPIO
Each MAIN and AUX IO Subsystem includes four
GPIO ports. The ports can be utilized in two ways: A
port can be associated with a Livewire Channel for con-
trol to/from an external device or a GPIO port can be
monitored and controlled by PathfinderPC.
Fig. 10-6: Audio I/O Subsystem - GPIO