Axia element v.2.0 Installation & User Manual page 152

CE Mark Conformance, Cont'd
Testing was conducted during the period September 22 - October 19, 2005.
1.2 Purpose Testing was performed to evaluate safety, emissions and immunity, conformance to enable CE mark-
ing.
1.3 Conclusions The Element audio control surface was found to be compliant and CE marking was applied to
the product.
Conformity is declared to the standards: EN50081-1, EN50082-1.
2.0 HF Radiated Emissions
2.1 Standards Applied The unit was laboratory evaluated according to standard: EN50081-1 using Measurement
Document: EN55022, Class B.
2.2 Testing The unit was tested and evaluated by: Smith Electronics*
2.3 Test Results The unit was found to be in conformance for both radiated and line-conducted emissions.
3.0 Immunity
3.1 Standards Applied
3.1.1 ESD Susceptibility Measurement Document: IEC 1000-4-2 (IEC 801-2). Immunity to static electricity.
3.1.2 Radiated Susceptibility - HF Electric Field Document: IEC 1000-4-3 (IEC 801-3).
3.1.3 Conducted Susceptibility - Power Line Measurement Documents: Burst/Transients: IEC 1000-4-4 (IEC
801-4), Surge: IEC 1000-4-5 (IEC 801-5) Voltage Fluctuations: IEC 1000-4-1 (IEC 801-1)
3.2 Testing
3.2.1 ESD Immunity The unit was tested and evaluated by: Smith Electronics*
3.2.2 Radiated Immunity - RF Electric Field The unit was tested and evaluated by: Smith Electronics*
3.2.3 Conducted Immunity - Power Line Testing to IEC 801-4 was conducted by: Smith Electronics*
*Smith Electronics
8200 Snowville Rd.
Cleveland, OH 44141 (USA)
CE Conformance
This device complies with the requirements of EEC Council Directives 93/68/EEC (CE Marking); 73/23/EEC
(safety low-voltage directive); 89/336/EEC (electromagnetic compatibility). Conformity is declared to the following
standards:: EN50081-1, EN50082-1.
©2016 Axia Audio- Rev 1.8.1