Axia element v.2.0 Installation & User Manual page 41

Figure 3-2: Source Profile General Settings
follow.
Reminder: Did you define your audio sources
from the Engine and Nodes as outlined in Chap-
ter One or Two? If not, go no further – you've
got to do that before you can continue with
Source Profile setup.
•
PRIMARY SOURCE:
you previously defined (during Audio Node or Pow-
erStation I/O setup) are available in this drop-down
box; pick one.
•
SOURCE PROFILE NAME:
ter descriptive name for your source. This is the
description that will appear on the LED display
above the console fader.
•
SOURCE NAME OVERRIDE:
defining can supply Program Associated Data (for
instance, a computer playout system that sends song/
artist information), you can choose to have that text
dynamically substituted in the alphanumeric display
of the fader the source is assigned to. Instead of read-
ing PROPHET_1, for example, it could scroll FERGIE.
» Choose
alpha display the name you typed into the Source
Profile Name field above.
» Choose
you'd like the PAD text displayed instead.
» Choose
and PAD text alternately display on a 3-second
interval.
•
SOURCE AVAILABILITY:
termine which faders (or other inputs) you'll allow
this source to be assigned to. For example, if your
source is a Control Room mic, and you only want
it to appear on the left-most fader, you would check
only the box marked
make a CD player available on any fader, so you'd
check the boxes for all faders. Some sources – es-
pecially air monitors – you might wish to prevent
from ever being assigned to a fader, so you would
uncheck the boxes for all faders. The number of fad-
er checkboxes show will vary depending upon the
number of faders installed in your Element.
The three final check boxes,
Studio monitor input
mine whether the board op will be able to assign this
source to the CR and Studio monitor and headphone
buses or the Virtual Mixer (please see Chapter 7:
Virtual Mixer for details on this feature).
©2016 Axia Audio- Rev 1.8.1
All of the audio sources that
Type a 10-charac-
If the source you're
to have the channel
Show Sourcename
Allow Application to Override
to have the Source Name
Show Both
These check boxes de-
. You might want to
Channel 1
CR monitor inputs
and
V-Mixer input
if
,
deter-