Axia element v.2.0 Installation & User Manual page 43

may be turned ON or OFF at will.
Element supports both US and Euro modes. The
next few settings are used for setting up the
desired style of phone operation.
Figure 3-3: Settings for configuring Element for
operation with Telos phone systems
Note: For complete instructions on how to use
thes options when setting up a phone system
with Element, please refer to Appendix D:
Working With Phone Hybrids.
Figure 3-4: More Source Profile Settings
•
PREVIEW ROUTING:
signal originates.
view
»
Pre-fader listen
that most broadcasters use.
Determines where the
Pre-
is the legacy CUE function
©2016 Axia Audio- Rev 1.8.1
»
After-fader listen (SOLO)
some users and is selected here.
•
PREVIEW SWITCHING MODE:
will happen to a source's off-air
ment when that source is taken to air.
»
Normal, Auto-Switching Disabled:
bus assignment will be retained even after
view
the fader is turned
»
CHANNEL ON turns Preview OFF:
source is assigned to
tioning, turning its channel
assignment.
Preview
»
Preview ON turns Channel OFF:
what it says - sometimes used for Phone channels.
•
HYBRID ANSWER MODE:
to tailor Element's Hybrid Answer mode to suit your
facility's operating style. It is intended for hybrids
that use external GPIO for device control.
»
Normal, Auto Answer Disabled:
vides no auto-answer logic when a fader with a
hybrid assigned is turned
»
Channel ON Answers Hybrid:
has an incoming call, turning its assigned fader
will answer the call.
ON
»
Channel ON or Preview ON Answers Hy-
When a hybrid has an incoming call, turn-
brid:
ing its assigned fader
nel's key will answer the call.
Preview
Allows you to specify the func-
•
Knob Function:
tion of a SoftKnob that can be used for tweaking the
channel gain structure. The SoftKnob is accessed by
pressing the
Options
disables this function
»
None -
»
Fader Trim Level -
channel's signal path just before the channel
fader.
»
Pre-Amp Gain -
Axia node or PowerStation I/O source associated
with this source.
•
BACKWARD FEED
lows you to enable or disable backfeeds to this audio
is preferred by
Determines what
assign-
Preview
The
Pre-
ON.
If this
for off-air audi-
Preview
will cancel its
ON
Does just
This setting allows you
Element pro-
On.
When a hybrid
or pressing that chan-
ON
button on the fader channel.
adjusts trim gain in the
adjusts the source gain of the
ENABLED/DISABLED:
Al-