Setting The Document Size For Scanning From The Document Processor ("Scan From Dp" Setting) - Kyocera KM-1650 Operation Manual

Various Settings and Registration
Setting the Document Size for Scanning from the Document Processor
("Scan from DP" setting)
Select here whether documents that are set in the Document Processor will be scanned as 8
11" or other such standard size paper, or as long documents (in the direction of the paper feed).
Notes
•
•
•
1 Press the System Menu key.
2
Press the
3 Press the Enter key.
4 Press the
DP.
5
Press the Enter key.
6 Press the
document size setting.
The asterisk (*) in the message display indicates the
current setting.
7 Press the Enter key. The setting for the document size is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
7-10
It is necessary to select Standard size original. here when transmitting both sides of
duplex (2-sided) documents. (See Sending 2-Sided Documents (Duplex Transmission) on
page 3-1.)
If you select Long original here, it will not be possible to have documents rotated for
transmission. (See Rotating the Document Image for Transmission (Rotate & Transmit
function) on page 1-20.)
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key to select Fax Default.
key or the key to select Scan from
key or the key to select the desired
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
Dial Confirm
Set Volume
Scan from DP
Scan from DP:
Standard size original
*
Long original
" x
1/2
:On
:Std size