U404 Adjust Scanning Margin(Dp) - Kyocera ECOSYS M2030dn/PN Service Manual

Item No.
U404 Adjust Scanning Margin(DP)
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
A Margin
B Margin
C Margin
D Margin
6. Change the setting value using the cursor left/right keys or numeric keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
If the above adjustment does not optimize the margins, perform the following maintenance
modes.
U034
(P.1-3-17)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
DP left margin
DP leading edge margin
DP right margin
DP trailing edge margin
DP leading edge margin
(4.0 +1.5/-1.0 mm)
DP left margin
(2.5 +1.5/-2.0 mm)
DP trailing edge margin
(4.0 mm or less)
Figure 1-3-14
U402 U403
(P.1-3-36) (P.1-3-37)
1-3-38
2PK/2PL/2PM/2PN-5
Setting Initial
range setting
0.0 to 10.0 3.0
0.0 to 10.0 2.5
0.0 to 10.0 3.0
0.0 to 10.0 4.0
DP right margin
(2.5 +1.5/-2.0 mm)
U404
Change in
value per step
0.5 mm
0.5 mm
0.5 mm
0.5 mm