Table of Contents
Advertisement
3 Configuring and monitoring the LANCOM
switch
3.1
Configuration options
There are two different methods of configuring the device.
By means of a graphical user interface or via a browser (WEBconfig). This
option is only available if you have network access to the device's IP
address from your computer. You can access WEBconfig via a encrypted
connection over SSL as well.
Instructions for configuring the device with WEBconfig are available in the
chapter "Web-based configuration".
Text-orientated configuration via a console (Command Line Interface –
CLI): This method of configuration, which requires a program such as Tel-
net, SSH, Hyperterminal, or similar, can be conducted over a network con-
nection or with a direct connection via serial interface (RS-232).
Instructions for configuring the device with CLI are available in the chap-
ter "Command line interface".
3.1.1
Starting WEBconfig
There are two ways of starting the configuration by browser:
If you know the device's IP address, simply enter this into the address line
in the browser. The factory settings for accessing the device are: User
name "admin", password "admin".
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 3: Configuring and monitoring the LANCOM switch
21
Advertisement
Table of Contents
