Lancom ES-2126+ Manual
  1. Manuals
  2. Brands
  3. Lancom Manuals
  4. Switch
  5. ES-2126+
  6. Manual
Lancom ES-2126+ Manual

Lancom ES-2126+ Manual

Hide thumbs Also See for ES-2126+:
Table of Contents

Advertisement

Quick Links

Download this manual
. . . c o n n e c t i n g
y o u r
b u s i n e s s
LANCOM ES-2126+
LANCOM ES-2126P+

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES-2126+ and is the answer not in the manual?

Questions and answers

Related Manuals for Lancom ES-2126+

Summary of Contents for Lancom ES-2126+

  • Page 1 . . . c o n n e c t i n g y o u r b u s i n e s s LANCOM ES-2126+ LANCOM ES-2126P+...
  • Page 2 LANCOM ES-2126+ LANCOM ES-2126P+...
  • Page 3 The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from LANCOM Systems. We reserve the right to make any alterations that arise as the result of technical development.
  • Page 4 The overall power output of 185 Watts from the PoE supply can be flexibly divided between the ports. The LANCOM switch can be managed with the clearly structured Webconfig and is supported by the LANCOM Management Tools (LANconfig and LANmonitor).
  • Page 5 The latest drivers, firmware, utilities and documentation are constantly available for download. In addition, LANCOM Support is available. For telephone numbers and contact addresses for LANCOM Support, please refer to the enc- losed leaflet or the LANCOM Systems Web site. Information symbols Very important instructions.

  • Page 6: Table Of Contents

    LANCOM ES-2126+ and LANCOM ES-2126P+ Contents Contents 1 Introduction 1.1 Key Features in the Device 1.2 Just what can your LANCOM switch do? 2 Installation 2.1 Package content 2.2 System requirements 2.3 Status displays and interfaces 2.3.1 LEDs and buttons on the LANCOM ES-2126+ 2.3.2 LEDs and buttons on the LANCOM ES-2126P+...
  • Page 7 LANCOM ES-2126+ and LANCOM ES-2126P+ Contents 4 Operation of Web- based Management 4.1 Web Management Home Overview 4.2 System 4.2.1 System Information 4.2.2 IP Configuration 4.2.3 Time Configuration 4.2.4 Account Configuration 4.2.5 Management Security 4.2.6 Virtual Stack 4.2.7 Login Protect 4.3 Port...
  • Page 8 LANCOM ES-2126+ and LANCOM ES-2126P+ Contents 4.9.3 Static Setting 4.9.4 MAC Alias 4.9.5 Port Security 4.9.6 Port Static MAC 4.9.7 GVRP 4.9.8 Config 4.9.9 Counter 4.9.10 Group 4.10 STP 4.10.1 Status 4.10.2 Configuration 4.10.3 Port 4.11 Trunk 4.11.1 Port Setting/Status 4.11.2 Aggregator View...
  • Page 9 LANCOM ES-2126+ and LANCOM ES-2126P+ Contents 4.18.2 VIP Port Setting 4.18.3 802.1p Setting 4.18.4 D-Type TOS 4.18.5 T-Type TOS 4.18.6 R-Type TOS 4.18.7 M-Type TOS 4.18.8 DSCP Setting 4.19 Diagnostics 4.19.1 Diag 4.19.2 Loopback 4.19.3 Ping 4.19.4 Watchdog 4.20 TFTP Server 4.21 Log...

  • Page 10: Introduction

    This LANCOM ES-2126P+ switch also complies with IEEE 802.3af, its advan- ced auto-sensing algorithm enables providing power devices (PD) discovery, classification, current limit, and other necessary functions.
  • Page 11 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 1: Introduction Robin (WRR). User-defined weight classification of packet priority can be based on either VLAN tag on packets or user-defined port priority. Spanning Tree: Support IEEE 802.1D, IEEE 802.1w (RSTP: Rapid Spanning Tree Protocol) standards.
  • Page 12 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 1: Introduction member ports, and, in nature, avoid wasting the bandwidth while IP mul- ticast packets are running over the network.

  • Page 13: Just What Can Your Lancom Switch Do

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 1: Introduction Just what can your LANCOM switch do? LANCOM ES- LANCOM ES- 2126+ 2126P+ Hardware ✔ ✔ Supports 24-port 10/100M TP ports with Nway and auto MDIX function ✔ ✔ 2 Gigabit dual media ports(TP/SFP) ✔...
  • Page 14 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 1: Introduction LANCOM ES- LANCOM ES- 2126+ 2126P+ ✔ ✔ 5 kinds of QoS, are as follows, MAC Priority, 802.1p Priority, IP TOS Pri- ority, and DiffServ DSCP Priority. ✔ ✔ WEBconfig and CLI management over telnet ✔...

  • Page 15: Installation

    Package content Before beginning with the installation, please check that nothing is missing from your package. Along with the LANCOM switch the box should contain the following accessories: LANCOM...

  • Page 16: Status Displays And Interfaces

    Meanings of the LEDs The following section describes the meaning of the LEDs. Please be aware that LANmonitor shows far more information about  the status of the LANCOM switch than the LEDs '→ Monitoring the LANCOM switch with LANmonitor'.

  • Page 17: Leds And Buttons On The Lancom Es-2126P

    10 Mbps or 100 Mbps mode is active. 2.3.2 LEDs and buttons on the LANCOM ES-2126P+ Located on the front of the device are light-emitting diodes (LEDs) that pro- vide information on device status, and also two buttons.
  • Page 18 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 2: Installation µ ¾ ³ » ¿ · º ¸ ¸ ³ CPU RUN Blinks green if the CPU is running without problem. · Power LED: Constant green when power is supplied to the device.

  • Page 19: Connectors On The Lancom Es-2126+ And Lancom Es-2126P

    Constant green when the optical port is active. Off when the TP port is active. Port 25 and 26 2.3.3 Connectors on the LANCOM ES-2126+ and LANCOM ES-2126P+ The following connectors are located on the rear of the device. ³...

  • Page 20: Software Installation

    Software installation The following section describes the installation of the Windows-compatible system software LANtools, as supplied. You may skip this section if you use your LANCOM switch exclusively  with computers running operating systems other than Windows. 2.5.1 Starting the software setup Place the product CD into your drive.

  • Page 21: Which Software Should I Install

    With LANmonitor you can use a Windows computer to monitor all of your LANCOM devices. This program displays all important status infor- mation for a LANCOM switch, such as link status or port PoE state. With Documentation you copy the documentation files onto your PC.

  • Page 22: Configuring And Monitoring The Lancom Switch

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch 3 Configuring and monitoring the LANCOM switch Configuration options There are two different methods of configuring the device. By means of a graphical user interface or via a browser (WEBconfig). This option is only available if you have network access to the device's IP address from your computer.
  • Page 23 The assigned IP address can only be determined by using the appropriate tools or via the DHCP server. If the DHCP server is a LANCOM device, the IP address of the LAN- COM switch can be read out from the DHCP table. If this is the case, the LANCOM switch can be accessed from any network computer that receives its IP address from the same DHCP server.

  • Page 24: Starting The Command Line Interface Over The Network

    3.1.2 Starting the Command Line Interface over the network If you know the device's IP address (see section above) and the LANCOM switch is accessible from your computer via the network, the you can use the command line interface via the network.

  • Page 25: Which Configuration Does The Device Use

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch » Log on with user name and password (default: admin, admin). Which configuration does the device use? The switch supports four different configurations: The start configuration, the current working configuration, the user configuration and the default confi- guration.

  • Page 26: Save/Restore

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch This is the default configuration and it cannot be altered. The web user interface has the following options to restore the switch to its default setting. With the function "restore default configuration included default IP address"...

  • Page 27: Config File

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch Here you can save the current configuration to the flash memory as a user configuration. Restore default configuration (includes default IP address) Here you can reset the switch to its factory settings. The default configu- ration replaces the start configuration.

  • Page 28: Monitoring The Lancom Switch With Lanmonitor

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch Export file path: Export start: You can export the start configuration from the flash memory. Export user conf.: You can export the user configuration from the flash memory.

  • Page 29: Port Poe Status

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch The left icon shows the config state: Gray: The port is deactivated in the configuration Yellow: The port is activated in the configuration The right-hand icon shows the link state:...
  • Page 30 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 3: Configuring and monitoring the LANCOM switch Along with PoE status, LANmonitor also shows the PoE class as detected for the powered devices. When a Powerded Device (PD) is connected, the Power Source Equipment (PSE) measures the power requirement of the device.

  • Page 31: 4 Operation Of Web-Based Management

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4 Operation of Web-based Management This chapter instructs you how to configure and manage the switch through the web user interface it supports, to access and manage the 24 10/100Mbps TP + 2 Gigabit dual media ports with TP/SFP Fiber management Ethernet switch.

  • Page 32: Web Management Home Overview

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management trator’s identity, can only monitor the system. For those who have no adminis- trator’s identity, can only monitor the system. There are only a maximum of three users able to login simultaneously in the switch.
  • Page 33 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management In this device, there are clicking functions on the panel provided for the infor- mation of the ports. These are very convenient functions for browsing the information of a single port. When clicking the port on the front panel, an information window for the port will be pop out.

  • Page 34: System

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management System 4.2.1 System Information Function name: System Information Function Description: Shows the basic system information. Parameter Description: Model name: The model name of this device.

  • Page 35: Ip Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management System Description: As it is, this tells what this device is. Here, it is “24-Port 10/100BaseT/TX Managed PoE Switch”. Location: Basically, it is the location where this switch is put. User- defined.
  • Page 36 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Function name: IP Configuration Function Description: Set IP address, subnet mask, default gateway and DNS for the switch. Parameter Description: DHCP Setting: DHCP is the abbreviation of Dynamic Host Configura- tion Protocol.

  • Page 37: Time Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management networks, hence, subnet mask is introduced to solve this problem. Subnet mask uses some bits from host address and makes an IP address looked Network address, Subnet mask number and host address.
  • Page 38 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 1305, has been adopted on the system is version 3 protocol. The switch pro- vides four built-in NTP server IP addresses resided in the Internet and an user- defined NTP server IP address.
  • Page 39 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management time since it passed over. And when the time passes over the ending time, the system time will be decreased one hour after one minute at the time since it passed over.

  • Page 40: Account Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Hour: Range is 0 ~ 23. Default: 0 4.2.4 Account Configuration In this function, only administrator can create, modify or delete the username and password. Administrator can modify other guest identities’ password wit- hout confirming the password but it is necessary to modify the administrator- equivalent identity.

  • Page 41: Management Security

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Password: guest 4.2.5 Management Security Through the management security configuration, the manager can do the strict setup to control the switch and limit the user to access this switch.
  • Page 42 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management ¿ When both “accept and deny” lists exist, then it will deny all connections, excluding the connection inside of the accepting range. ´ When both “accept and deny” lists exist, then it will deny all connections, excluding the connection inside of the accepting range and NOT inside of the denying range at the same time.
  • Page 43 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: Name: A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal 8 characters. VID: The switch supports two kinds of options for managed valid VLAN VID, including “Any”...

  • Page 44: Virtual Stack

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management and then press <Edit/Create> button. Of course, the existed entry also can be modified by pressing this button. Delete: Remove the existed entry of Management Security Configura- tion from the management security table.

  • Page 45: Login Protect

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: State: It is used for the activation or de-activation of VSM. Default is Enable. Role: The role that the switch would like to play in virtual stack. Two types of roles, including master and slave are offered for option.

  • Page 46: Port

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Lock-Minutes: Time in Minutes, for which the device blocks all logins after the maxi- mum number of login errors is achieved. Possible Values: 0 - 10, 0 disables login protect...
  • Page 47 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management will be automatically refreshed the port current status about every 5 seconds. Parameter: Port No: Display the port number. The number is 1 – 26. Both port 25 and 26 are optional modules.
  • Page 48 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management port and link partner in “Auto Speed” mode or 2) user setting in “Force” mode. The local port has to be preset its capability. In port 1 – 24, they are supported Fast Ethernet with TP media only, so the result will show 100M/Full or 100M/Half, 10M/Full and 10M/ Half duplex.
  • Page 49 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Fiber Type: Displays the fiber mode, for instance, Multi-Mode, Single-Mode. Tx Central Wavelength: Displays the fiber optical transmitting central wavelength, for instance, 850nm, 1310nm, 1550nm and so on.

  • Page 50: Port Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.3.2 Port Configuration Port Configuration is applied to change the setting of each port. In this confi- guration function, you can set/reset the following functions. All of them are described in detail below.

  • Page 51: Description

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Media type NWay Speed Duplex 100M TP ON/OFF 10/100M Full/Half 1000M TP ON/OFF 10/100/1000M Full for all, Half for 10/100 1000M Fiber ON/OFF 1000M Full In Auto-negotiation mode, no default value. In Forced mode, default value depends on your setting.

  • Page 52: Simple Counter

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter: Port: Number of the port. Description: Field to enter a port’s description. Possible Values: alpha numeric characters Default: empty 4.3.4 Simple Counter The function of Simple Counter collects any information and provides the counting about the traffic of the port, no matter the packet is good or bad.

  • Page 53: Detail Counter

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Rx Byte: Total received bytes. Tx Packet: The counting number of the packet transmitted. Rx Packet: The counting number of the packet received. Tx Collision: Number of collisions transmitting frames experienced.
  • Page 54 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Rx Octets: Total received bytes. Rx Errors: Number of bad packets received. Rx Unicast Packets: Show the counting number of the received unicast packet. Rx Broadcast Packets: Show the counting number of the received broadcast packet.

  • Page 55: Poe

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management TX Octets: Total transmitted bytes. Tx Unicast Packets: Show the counting number of the transmitted uni- cast packet. Tx Broadcast Packets: Show the counting number of the transmitted broadcast packet.
  • Page 56 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Vmain: The volt is supplied by the PoE. Imain: The sum of the current that every port supplies. Pconsume: The sum of the power that every port supplies.
  • Page 57 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management once the power required by the PD excesses the Class, Short Circuit or over temperature occurs. Parameter: Status: Include “Normal” or “Active” two kinds of status. The former means the port is ready to link and supply the power to the PD at any time.

  • Page 58: Loop Detection

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Class: The Class of the PD linked to the port of the switch. Loop Detection The loop detection is used to detect the presence of traffic. When switch recei- ves packet's(looping detection frame) MAC address the same as oneself from port, show Loop detection happens.
  • Page 59 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Basically, it is passive except issuing the trap information. The switch supports a switch to turn on or off the SNMP agent. If you set the field SNMP “Enable”, SNMP agent will be started up.

  • Page 60: Dhcp Boot

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Default trap host IP address: 0.0.0.0 Default port number :162 Trap: In the switch, there are 6 trap hosts supported. Each of them has its own community name and IP address; is user-definable. To set up a trap host means to create a trap manager by assigning an IP address to host the trap message.

  • Page 61: Igmp Snooping

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management power and then reboot and recover. At this moment, a bunch of switch or other network device on the LAN will try its best to find the server to get the services or try to set up the predefined links, they will issue many broadcast packets in the network.

  • Page 62: Igmp Snooping Status

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management The packets will be discarded by the IGMP Snooping if the user transmits mul- ticast packets to the multicast group that had not been built up in advance.

  • Page 63: Allowed Group

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management VLAN ID: Shows VLAN ID for each multicast group. Member Port: Shows member ports that join each multicast group. Member port may be only or more than one.

  • Page 64: Static Ip Multicast

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Edit: The existed entry also can be modified after pressing <Edit> but- ton. Delete: Remove the existed entry of allowed group configuration from the allowed group. 4.7.3 Static IP Multicast Here you can define mac table entries manually, which the device cannot learn automatically, for example.

  • Page 65: Client Information

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management For LANCOM ES- 2126+ only Parameter: Port: For this port the group limit is activated. Group Limit: Maximum number of groups which may use the port. Possible Values: 0 to 256.

  • Page 66: Mvr Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Index: Shows the index of the client. Port: Shows the port, which is connected to the client. MAC Address: Shows the mac address of the client. Multicast Address: Shows the multicast address of the client.

  • Page 67: Mvr Group Status

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Apply: Applies the settings to the switch. Index: Index of the allowed group. Begin Address: Start address of the allowed group. End Address: End address of the allowed group.

  • Page 68: Radius Igmp

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.7.8 RADIUS IGMP Here you can configure the parameters for the igmp authentication via RADIUS server. Parameter: Radius Server: Ip address of the RADIUS authentication server. Default: 192.168.1.1...

  • Page 69: Vlan

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Number of Retry: The maximum number of times that the authenticator forwards requests from the authentication server to the supplicant, before the authentication process is aborted. Possible values: numerical characters...
  • Page 70 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management filtering list or egress filtering list, the packet will be screened with more filtering criteria to determine if it can be forwarded. The switch supports supplement of 802.1q..

  • Page 71: Tag-Based Group

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management be forwarded as Tag-based VLAN. So, the incoming packets with tag will become the double-tag ones. 4.8.2 Tag-based Group Function name: Tag-based Group Configuration Function Description: It shows the information of existed Tag-based VLAN Groups.
  • Page 72 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Member: This is used to enable or disable if a port is a member of the new added VLAN, “Enable” means it is a member of the VLAN. Just tick the check box beside the port x to enable it.

  • Page 73: Pvid

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Delete Group: Just press the <Delete> button to remove the selected group entry from the Tag-based group table. Edit a group: ust select a group entry and press the <Edit> button, then you can modify a group’s description, member and untag set-...
  • Page 74 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Function Description: In PVID Setting, user can input VID number to each port. The range of VID number is from 1 to 4094. User also can choose ingress filtering rule (Rule 2) to each port. The Ingress Filtering Rule 2 is “drop untagged frame”.

  • Page 75: Port-Based Group

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management will be processed. If the later is the case, only the packets carrying VLAN tag will be processed, the rest packets will be discarded. 4.8.4 Port-based Group Function name: Port-based Group Configuration Function Description: It shows the information of the existed Port-based VLAN Groups.

  • Page 76: Management Vlan

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Delete Group: Just press the <Delete> button to remove the selected group entry from the Port-based group table. Edit a group: Just select a group entry and press the <Edit> button, then you can modify a group‘s description and member set.

  • Page 77: Mac Table

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management State: Enables or disables port-based VLAN. VID: VLAN identifier for the port-based VLAN. MAC Table MAC Table Configuration gathers many functions, including MAC Table Infor- mation, MAC Table Maintenance, Static and MAC Alias, which cannot be categorized to some function type.

  • Page 78: Mac Table Maintenance

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management State: Display the method that this MAC Entry is built. It may show “Dynamic MAC” or “Static MAC”. 4.9.2 MAC Table Maintenance This function can allow the user to set up the processing mechanism of MAC Table.

  • Page 79: Static Setting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 8191. As to port 25~port 26, only the fixed value “8192” is assigned to these two ports and user cannot configure this value. 4.9.3 Static Setting The function of Static is used to configure MAC’s real manners inside of the switch.

  • Page 80: Mac Alias

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter: MAC: It is a six-byte long Ethernet hardware address and usually expressed by hex and separated by hyphens. For example, 00 – 40 - C7 - D6 – 00 - 01 VID: VLAN identifier.

  • Page 81: Port Security

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management As to MAC Alias Delete function is used to let you remove an alias name to a MAC address. You can select an existed MAC address or alias name to remove.
  • Page 82 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management port are able to access this if Port Security is active. If there are no MAC addresses entered into the list for a port, then all addresses in the MAC table can access it.

  • Page 83: Gvrp

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Delete: Deletes a mac address from a port’s list. 4.9.7 GVRP GVRP is an application based on Generic Attribute Registration Protocol (GARP), mainly used to automatically and dynamically maintain the group membership information of the VLANs.

  • Page 84: Config

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.9.8 Config GVRP Config In the function of GVRP Config, it is used to configure each port’s GVRP ope- ration mode, in which there are seven parameters needed to be configured described below.

  • Page 85: Counter

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management value, normal registrar, fixed registrar and forbidden registrar, provi- ded for the user’s choice. Normal:It is Normal Registration. The Registrar responds normally to incoming GARP messages. The default setting is Normal.
  • Page 86 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Received: Total GVRP Packets: Total GVRP BPDU is received by the GVRP application. Invalid GVRP Packets: Number of invalid GARP BPDU is received by the GARP application. LeaveAll Message Packets: Number of GARP BPDU with Leave All message is received by the GARP application.

  • Page 87: Group

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.9.10 Group GVRP Group Information To show the dynamic group member and their information. Parameter Description: Current Dynamic Group Number: The number of GVRP group that are created currently.
  • Page 88 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: STP State: Show the current STP Enabled / Disabled status. Default is “Disabled”. Bridge ID: Show switch’s bridge ID which stands for the MAC address of this switch.

  • Page 89: Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 0. The figures showing in the screen may not be the exact time it spent but very close to, because the time is eclipsing. Time Since Last Topology Change: Time Since Last Topology Change is the accumulated time in unit of seconds the STP has been since the last STP Topology Change was made.
  • Page 90 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management other bridges will use the hello time assigned by this switch to com- municate with each other. The valid value is 1 ~ 10 in unit of second.

  • Page 91: Port

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.10.3 Port Function name: STP Port Setting Function Description: In the STP Port Setting, one item selection and five parameters settings are offered for user’s setup. User can disable and enable each port by selecting each Port Status item.
  • Page 92 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Bridge by calculating the sum of path cost contributed by all ports on this path. A port with a smaller path cost value would become the Root Port more possibly.

  • Page 93: Trunk

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Auto, it means RSTP will use the duplex mode resulted from the auto- negotiation. In today’s switched networks, most links are running in full-duplex mode. For sure, the result may be half-duplex, in this case, the port will not fast transit to Forwarding state.
  • Page 94 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management if there are three Fast Ethernet ports aggregated in a logical port, then this logical port has bandwidth three times as high as a single Fast Ethernet port has.

  • Page 95: Port Setting/Status

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Per Trunking Group supports a maximum of 4 ready member-ports. Please note that some decisions will automatically be made by the system while you are configuring your trunking ports. Trunk Setting Rules are listed...

  • Page 96: Aggregator View

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and its own aggregator ID is the same as its own Port No. We can regard an aggregator as a representative of a trunking group.

  • Page 97: Lacp System Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Ready Ports: Show only the ready member ports within an aggregator (port). 4.11.3 LACP System Configuration Show the detailed information of the LACP trunking group. Parameter Description: Actor: The switch you are watching on.

  • Page 98: Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Function Description: It is used to set the priority part of the LACP system ID. LACP will only aggregate together the ports whose peer link partners are all on a single system. Each system supports LACP will be assigned a globally unique System Identifier for this purpose.
  • Page 99 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management It is an entity being authenticated by an authenticator. It is used to com- municate with the Authenticator PAE (Port Access Entity) by exchanging the authentication message when the Authenticator PAE request to it.
  • Page 100 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management In this figure is the typical configuration, a single supplicant, an authenticator and an authentication server. B and C is in the internal network, D is Authen- tication server running RADIUS, switch at the central location acts Authenti- cator connecting to PC A and A is a PC outside the controlled port, running Supplicant PAE.
  • Page 101 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management The figure shows the procedure of 802.1x authentication. There are steps for the login based on 802.1x port access control management. The protocol used in the right side is EAPOL and the left side is EAP.
  • Page 102 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management in the authorized state. The supplicant and other devices connected to this port can access the network. If the authenticator receives a Radius- Access-Reject, it will send an EAP-Failure to the supplicant. This means the supplicant is failed to authenticate.
  • Page 103 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Port Mode Port Control Authentication Port Status Disable Don’t Care Don’t Care Port Uncontrolled Multihost Auto Successful Port Authorized Multihost Auto Failure Port Unauthorized Multihost ForceUnauthorized Don’t Care...
  • Page 104 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 802.1x Mode Setting Set the operation mode of 802.1X for each port. In this device, it supports only Multi-host operation mode. Parameter Description: Port Number: Indicate which port is selected to configure the 802.1x operation mode.
  • Page 105 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Port Security Management Shows each port status. In Multihost mode, it shows the port number and its status, authorized or unauthorized. Parameter Description: Disable Mode: When selecting Disable mode for a port in the function 802.1X Port Mode Configuration, the port is in the uncontrolled port...
  • Page 106 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management the port is granted to access the network, the port status is authori- zed, otherwise, unauthorized. Param. Setting Function Description: This function is used to configure the parameters for each port in 802.1x port security application.
  • Page 107 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Port Control: This is used to set the operation mode of authorization. There are three type of operation mode supported, ForceUnauthori- zed, ForceAuthorized, Auto. ForceUnauthorized: The controlled port is forced to hold in the unauthorized state.

  • Page 108: Tacacs

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Default: 30 seconds. serverTimeout(1-65535 s): A timeout condition in the exchange bet- ween the authenticator and the authentication server. The valid range: 1 –65535. Default: 30 seconds 4.13 TACACS+ 4.13.1...

  • Page 109: State

    The value 0.0.0.0 deactivates this entry. Secret key: The password for encrypting the communications between NAS and TACACS+ servers. The password must be entered identically into the LANCOM and the  TACACS+ server. We recommend that you do not operate TACACS+...

  • Page 110: Authentication

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management You can choose the TACACS+ server manually. Enter your username, a  colon and the number of the TACACS+ server in the login field to choose one of the two servers defined in the TACACs+ settings. For example, if your username is ’admin’...

  • Page 111: Authorization

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.13.4 Authorization State: Activates authorization via TACACS+ server. If TACACS+ authorization is activated, all authorization data is transmitted via TACACS+ protocol to the configured TACACS+ server. On the TACACS+...
  • Page 112 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Port Reboot Security SNMP System TACACS+ TFTP Time Trunk VLAN Virtual Stack. The arguments “show” and “set” can be permitted or restricted separately for each command. For the admin account all undefined commands must be permitted, ...

  • Page 113: Accounting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.13.5 Accounting State: Activates accounting via TACACS+ server. If TACACS+ accounting is activated, all accounting data is transmitted via TACACS+ protocol to the configured TACACS+ server. TACACS+ accounting will only activate if the defined TACACS+ server ...

  • Page 114: E-Mail

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled Module Swap: Module Inserted, Module Removed, Dual Media Swap- PoE: PoE Failure 4.14.2 E-Mail Alarm configuration is used to configure the persons who should receive the alarm message via email.

  • Page 115: Configuration

    Save/Restore Here you can configure the settings for saving and restoring device configu- rations. For further information read the ’Save/Restore” section in the chapter ’Configuring and monitoring the LANCOM switch’. 4.15.2 Config file Here you can save and restore backups of device configurations. For further information read the ’Config File’...

  • Page 116: Isolated Group

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Monitored Ingress Port: Set up the port for being monitored. It only monitor the packets received by the port you set up. Just tick the check box (ž) beside the port x and valid port is Port 1~26.
  • Page 117 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management warding any packets in case its all ports become the members of the Isolated group. Restricted Group Function Description: The function of the Restricted Group can decide the direction of transmitting packets for the specific port.

  • Page 118: Bandwidth Management

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.17 Bandwidth Management 4.17.1 Ingress Bandwidth Setting Ingress Bandwidth Setting function is used to set up the limit of Ingress band- width for each port. Parameter Description: Port No.: Choose the port that you would like this function to work on it.

  • Page 119: Egress Bandwidth Setting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.17.2 Egress Bandwidth Setting Egress Bandwidth Setting function is used to set up the limit of Egress band- width for each port. Parameter Description: Port No.: Choose the port that you would like this function to work on it.

  • Page 120: Qos (Quality Of Service) Configuration

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: Storm Type: Disable: Disable the function of the bandwidth storm control. Broadcast Storm Control: Enable the function of bandwidth storm control for broadcast packets. Multicast Storm Control: Enable the function of bandwidth storm control for multicast packets.
  • Page 121 LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management bit SERVICE TYPE field that specifies how the datagram should be handled. The field could be divided into six subfields as follows, PRECEDENCE (3 bits), D-Type (Delay Priority, 1 bit ), T-Type (Throughput Priority, 1bit), R-Type (Reli- ability Priority, 1bit ), M-Type (Monetary Cost Priority, 1bit ), and UNUSED (1bit User can randomly control these fields to achieve some special QoS goals.

  • Page 122: Qos Global Setting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management · enable both VIP and DSCP Choose priorities of VIP and DSCP. » enable both TOS and DSCP Choose "DSCP". ¿ enable both VIP and DSCP Choose priorities of VIP and DSCP.

  • Page 123: Vip Port Setting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Weight (1~55): Over here, you can make an arrangement to Weight values of Queue 0 to Queue 3. The range of Weight you can set is 1~55. In default, the weight of Queue 0 is 1, the weight of Queue 1 is 2, the weight of Queue 2 is 4, and the weight of Queue 3 is 8.

  • Page 124: Setting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.18.3 802.1p Setting This function will affect the priority of VLAN tag. Based on priority of VLAN tag, it can arrange 0~8 priorities, priorities can map to 4 queues of the switch (queue 0~3) and possess different bandwidth distribution according to your weight setting.

  • Page 125: T-Type Tos

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: TOS Delay Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is...

  • Page 126: R-Type Tos

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: TOS Throughput Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Pri- ority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Pri-...

  • Page 127: M-Type Tos

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: TOS Reliability Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1...

  • Page 128: Dscp Setting

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: TOS Monetary Cost Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Pri-...

  • Page 129: Diagnostics

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Parameter Description: DSCP Priority Mapping: 64 kinds of priority traffic as mentioned above, user can set up any of Queue 0~3. In default, Priority 0~15 are mapping to Queue 0, Priority 16~31 are mapping to Queue 1, Priority 32~47 are mapping to Queue 0, Priority 48~63 are mapping to Queue 4.19...

  • Page 130: Loopback

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.19.2 Loopback Function name: Loopback Test In the Loopback Test function, there are two different loopback tests. One is Internal Loopback Test and the other is External Loopback Test. The former test function will not send the test signal outside the switch box.

  • Page 131: Ping

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 4.19.3 Ping Ping Test function is a tool for detecting if the target device is alive or not through ICMP protocol which abounds with report messages. The switch pro- vides Ping Test function to let you know that if the target device is available or not.

  • Page 132: Tftp Server

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Reset the management CPU Interface: When ping failure time reach configured value then switch will reset the managed switch's CPU interface. Default state is disable. Fail Count: Default Ping Failed Count= 10, Range for Setting: 1~20...

  • Page 133: Log

    Information about managing configurations and firmware is available  in the sections 'Config File' and 'Save/Restore' in the chapter 'Confi- guring and monitoring the LANCOM switch'. Parameter: Remote TFTP Server: Enter the IP address of the external TFTP server here.

  • Page 134: Firmware Upgrade

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management the report table, No., Time and Events are three fields contained in each trap record. Parameter Description: No.: Display the order number that the trap happened. Time: Display the time that the trap happened.

  • Page 135: Reboot

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management 2. Specifying what the filename and where the file is. You must specify full path and filename. Then, press <Upgrade> button if your download is not successful, the switch will also be back to “Software Upgrade”, and it will not upgrade...

  • Page 136: Logout

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 4: Operation of Web- based Management Save and Reboot:Save the current settings as start configuration before rebooting the switch. Reboot: Reboot the system directly. Logout 4.24 You can manually logout by performing Logout function. In the switch, it pro- vides another way to logout.

  • Page 137: Operation Of Cli Management (Englisch)

    LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 5 Operation of CLI Management (englisch) CLI Management Refer to Chapter 2 for basic installation. The following description is the brief of the network connection. -- Locate the correct DB-9 null modem cable with female DB-9 connector.

  • Page 138: Commands Of Cli

    LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Fig. 4-1 Fig. 4-2 Commands of CLI Fig. 4-3...

  • Page 139: Global Commands Of Cli

    LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 5.2.1 Global Commands of CLI Syntax: Description: Back to the top mode. When you enter this command, your current position would move to the top mode. If you use this command in the top mode, you are still in the position of the top mode.
  • Page 140 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ES-2126+(trunk)# exit ES-2126+# help Syntax: help Description: To show available commands. Some commands are the combination of more than two words. When you enter this command, the CLI would show the complete commands.
  • Page 141 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) logout Logout the system save start Save as start config save user Save as user config restore default Restore default config restore user Restore user config ES-2126+(ip)# history...
  • Page 142 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 9. events 10. end 11. ip 12. help 13. history ES-2126+(ip)# history 3 Command history: 12. help 13. history 14. history 3 ES-2126+(ip)# logout Syntax: logout Description: When you enter this command via Telnet connection, you would logout the system and disconnect.
  • Page 143 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) choose N or n, the IP address will keep the same one that you had saved before. If restoring default successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system would reboot immediately;...
  • Page 144 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Restoring ... Restore User Configuration Successfully Press any key to reboot system. save start Syntax: save start Description: To save the current configuration as the start one. When you enter this command, the CLI would save your current configuration into the non- volatile FLASH.

  • Page 145: Local Commands Of Cli

    LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Saving user... Save Successfully ES-2126+# 5.2.2 Local Commands of CLI Please note: to use one of the local commands, you first have to change to the corresponding configuration area, e.g. 802.1x <Enter> set mode 1.
  • Page 146 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 1:set 802.1x to Multi-host mode Possible value: <port range> : 1 to 26 <mode>: 0 or 1 Example: ES-2126+(802.1x)# set mode 2 1 set port- control Syntax: set port-control <port-range> <authorized>...
  • Page 147 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <port range> : 1 to 26 <sec> : 0-65535, default is 60 Example: ES-2126+(802.1x)# set quiet-period 2 30 set reAuthEnabled Syntax: set reAuthEnabled <port-range> <ebl> Description: A constant that define whether regular reauthentication will take place on this port.
  • Page 148 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(802.1x)# set reAuthMax 2 2 set reAuthPeriod Syntax: set reAuthPeriod <port-range> <sec> Description: A constant that defines a nonzero number of seconds between periodic reauthentication of the supplicant.
  • Page 149 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set state Syntax: set state <ip> <port-number> <secret-key> Description: To configure the settings related with 802.1X Radius Server. Argument: <ip> : the IP address of Radius Server, and the IP format is xxx.xxx.xxx.xxx <port-number>...
  • Page 150 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set txPeriod Syntax: set txPeriod <port-range> <sec> Description: A timer used by the Authenticator PAE state machine to determine when an EAPOL PDU is to be transmitted. Argument: <port range>...
  • Page 151 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Disable show parameter Syntax: show parameter Description: To display the parameter settings of each port. Argument: None. Possible value: None. Example: ES-2126+(802.1x)# show parameter port 1) port control : Auto...
  • Page 152 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ES-2126+(802.1x)# show security Port Mode Status ====== ============ ============== Disable Multi-host Unauthorized Disable Disable Disable Disable show state Syntax: show state Description: To display the Radius server configuration.
  • Page 153 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <name> : new account name Possible value: <name> : A string must be at least 5 character. Example: ES-2126+(account)# add aaaaa Password: Confirm Password: ES-2126+(account)# Syntax: del <name>...
  • Page 154 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Current username (aaaaa):bbbbb New password: Confirm password: Username changed successfully. Password changed successfully. show Syntax: show Description: To show system account, including account name and identity. Argument: None.
  • Page 155 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <#>: 1 to 6 Example: ES-2126+(alarm-email)# del mail-address 2 del server-user Syntax: del server-user Description: To remove the server, user account and password. Argument: None. Possible value: None.
  • Page 156 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: <ip>:email server ip address or domain name Possible value: None. Example: ES-2126+(alarm-email)# set server 192.168.1.6 set user Syntax: set user <username> Description: To set up the account of the email server.
  • Page 157 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Email Address 2: Email Address 3: Email Address 4: Email Address 5: Email Address 6: <<events>> del all Syntax: del all <range> Description: To disable email, sms and trap of events.
  • Page 158 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To disable the sms of the events. Argument: <range>:del the range of sms, syntax 1,5-7 Possible value: <range>: 1~22 Example: ES-2126+(alarm-events)# del sms 1-3 del trap Syntax: del trap <range>...
  • Page 159 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To enable the email of the events. Argument: <range>:set the range of email, syntax 1,5-7 Possible value: <range>: 1~22 Example: ES-2126+(alarm-events)# set email 1-3 set sms Syntax: set sms <range>...
  • Page 160 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) show Description: The Show here is used to display the configuration of alarm event. Argument: None. Possible value: None. Example: ES-2126+(alarm-events)# show Events Email SMS Trap ----------------------------------------- 1 Cold Start...
  • Page 161 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 20 Module Removed 21 Moudle Media Swapped 22 PoE Failure show (alarm) Syntax: show Description: The Show for alarm here is used to display the configuration of Trap, SMS or E-mail.
  • Page 162 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To delete sms server, user account and password. Argument: None. Possible value: None. Example: ES-2126+(alarm-sms)# del server-user set phone- number Syntax: set phone-number <#> <phone-number> Description: To add sms phone number.
  • Page 163 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set user Syntax: set user <username> Description: To set up user account and password of sms server. Argument: <username>: SMS server account Possible value: None. Example: ES-2126+(alarm-sms)# set user ABC...
  • Page 164 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) autologout autologout Syntax: autologout <time> Description: To set up the timer of autologout. Argument: <time>: range 1 to 3600 seconds, 0 for autologout off, current setting is 180 seconds.
  • Page 165 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set ingress-rate <range> <data_rate> Description: To set up the ingress-rate of the ports. Argument: <range>:syntax 1,5-7, available from 1 to 26 <data_rate>: 66-1024000(Kb). port 1-24: 66-102400(Kb); port 25-26: 66-1024000(Kb) Possible value: <range>: 1 to 26...
  • Page 166 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To display all current settings of the bandwidth. Argument: None. Possible value: None. Example: ES-2126+(bandwidth)# show Port Ingress Rate(Kb) Egress Rate(Kb) ====== ================== ================= 102400 102400 102400...
  • Page 167 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(config-file)# export start Export successful. export user- conf Syntax: Description: To run the export user-conf function. Argument: None. Possible value: None. Example: ES-2126+(config-file)# export user-conf Export successful.
  • Page 168 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To run the import user-conf function. Argument: None. Possible value: None. Example: ES-2126+(config-file)# import user-conf Import successful. set export-path Syntax: Description: To set up the file path and filename that user would like to export.
  • Page 169 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(config-file)# show TFTP Server IP Address: 192.168.3.111 Export Path and Filename: log/21511.txt Import Path and Filename: log/21511.txt dhcp- boot set dhcp- boot...
  • Page 170 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Second : 30 ES-2126+(dhcp-boot)# diag diag Syntax: diag Description: Diag is used to test whether EEPROM, UART, DRAM and Flash is normal or not. Argument: None. Possible value: None.
  • Page 171 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) External Loopback Test : Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Fail...
  • Page 172 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(firmware)# show TFTP Server IP Address: 192.168.3.111 Path and Filename : FEL2SW26_ES2126_v2.05.img upgrade Syntax: Description: To run the software upgrade function. Argument: None.
  • Page 173 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) enable Syntax: enable Description: To enable the gvrp function. Argument: None. Possible value: None. Example: ES-2126+(gvrp)# enable group Syntax: group <group number> Description: To enter any of gvrp group for changing gvrp group setting. You can change the applicant or registrar mode of existing gvrp group per port.
  • Page 174 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ES-2126+(gvrp-group-2)# show GVRP group VID: 2 Port Applicant Registrar ---- --------------- --------- Non-Participant Normal Non-Participant Normal Non-Participant Normal Non-Participant Normal Non-Participant Normal Non-Participant Normal Normal Normal Normal Normal...
  • Page 175 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Non-Participant Fixed Non-Participant Fixed Normal Fixed Normal Fixed Normal Fixed Normal Fixed Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal set applicant Syntax: set applicant <range> <normal|non-participant>...
  • Page 176 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To set default registrar mode for each port. Argument: <range>: port range, syntax 1,5-7, available from 1 to 26 <normal>: set registrar as normal mode <fixed>: set registrar as fixed mode <forbidden>: set registrar as forbidden mode...
  • Page 177 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 1000 Normal Normal Enable 1000 Normal Normal Enable 1000 Normal Normal Enable 1000 Normal Normal Enable 1000 Normal Normal Enable 1000 Normal Normal Enable 1000 Normal Normal Enable...
  • Page 178 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set timer Syntax: set timer <range> <join> <leave> <leaveall> Description: To set gvrp join time, leave time, and leaveall time for each port. Argument: <range> : port range, syntax 1,5-7, available from 1 to 26 <join>: join timer, available from 20 to 100...
  • Page 179 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ---- --------- ---------- ------------- -------------- - --------- ---------- 1000 Normal Normal Disable 1000 Normal Normal Disable 1000 Normal Normal Disable 1000 Normal Normal Disable 1000 Normal Normal Disable...
  • Page 180 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Counter Name Received Transmitted -------------------- -------- ----------- Total GVRP Packets Invalid GVRP Packets ---- LeaveAll message JoinEmpty message JoinIn message LeaveEmpty message Empty message show group Syntax: show group Description: To show the gvrp group.
  • Page 181 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: <name>: hostname, max. 40 characters. Possible value: <name>: hostname, max. 40 characters. Example: ES-2126+# hostname Company Company# igmp- snooping add allowed- group Syntax: add allowed-group <ip-multicast> <vid> <port-range>...
  • Page 182 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <end address> : last multicast address of the group. Possible value: <begin address> : 224.0.1.0 - 239.255.255.255 <end address> : 224.0.1.0. - 239.255.255.255 Example: ES-2126+(igmp-snooping)# add mvr-allow-group 224.0.1.0 224.0.2.0...
  • Page 183 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(igmp-snooping)# del allowed-group 1 del mvr- allow- group Syntax: del mvr-allow-group <index> Description: To delete an entry of the MVR allowed group entries. Argument: <index> : index of the MVR allowed group entry.
  • Page 184 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <end address> : last multicast address of the group. Possible value: <index>: 1 - 10 <begin address> : 224.0.1.0 - 239.255.255.255 <end address> : 224.0.1.0. - 239.255.255.255 Example:...
  • Page 185 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set mode Syntax: set mode <status> Description: To set up the mode of IGMP Snooping. Argument: <status>: 0:disable, 1:active, 2:passive Possible value: <status>: 0,1or 2 Example: ES-2126+(igmp-snooping)# set mode 2...
  • Page 186 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <mvid> : 1 - 4094 Example: ES-2126+(igmp-snooping)# set mvr-state 1 22 set mvr- vid Syntax: set mvr-vid <vid> Description: To set MVR Vlan ID. Argument: <vid> : MVR Vlan ID Possible value: <vid>...
  • Page 187 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: <value> : 0 to 10 times Possible value: <value> : 0 - 10 Example: ES-2126+(igmp-snooping)# set rad-igmp-retry 5 set rad-igmp-state Syntax: set rad-igmp-state <ip> <port-number> <secret-key> <Accounting Server>...
  • Page 188 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: <value> : 0 to 60 seconds Possible value: <value> : 0 - 60 Example: ES-2126+(igmp-snooping)# set rad-igmp-timeout 5 show client- info Syntax: show client-info <range> Description: To display information about the clients connected to a port.
  • Page 189 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Port Limit Port Limit Port Limit ---- ----- ---- ----- ---- ----- show igmp- snooping Syntax: Description: To display IGMP snooping mode and allowed IP multicast entry. Argument: None.
  • Page 190 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(igmp-snooping)# show multicast IP Multicast: None show mvr- config Syntax: Description: To display the MVR configuration. Argument: None. Possible value: None. Example:...
  • Page 191 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) None. Example: ES-2126+# igmp-snooping ES-2126+(igmp-snooping)# show mvr-group-membership 1) Group Address: 224.0.1.76 Port Member : 5 2) Group Address: 224.0.1.24 Port Member : 5 3) Group Address: 224.0.1.41 Port Member : 5...
  • Page 192 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) None. Example: ES-2126+(igmp-snooping)# show rad-igmp Radius Server: 192.168.1.1 show static- multicast Syntax: Description: To display static-ip multicast entry. Argument: None. Possible value: None. Example: ES-2126P+(igmp-snooping)# show static-multicast 1) IP Address : 244.1.1.1...
  • Page 193 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) enable dhcp Syntax: enable dhcp <manual|auto> Description: To enable the system DHCP function and set DNS server via manual or auto mode. Argument: <manual|auto> : set DNS by using manual or auto mode.
  • Page 194 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Possible value: <ip> : 192.168.1.1 or others <mask> : 255.255.255.0 or others <gateway> : 192.168.1.253 or others Example: ES-2126+(ip)# 192.168.1.2 255.255.255.0 192.168.1.253 show Syntax: show Description: To display the system’s DHCP function state, IP address, subnet mask, default gateway, DNS mode, DNS server IP address and current IP address.
  • Page 195 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To clear the log data. Argument: None. Possible value: None. Example: ES-2126+(log)# clear disable auto-upload Syntax: disable auto-upload Description: To disable the auto-upload function. Argument: None. Possible value: None.
  • Page 196 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To show a list of trap log events. When any of log events happens, it will be recorded and using show command in log function to query. Up to 120 log records are supported.
  • Page 197 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) login- protect set Lock-Minutes Syntax: set Lock-Minutes <min> Description: To set login lock time. Argument: <min> : time in minutes Possible value: <min> : numeric characters from 1 to 10...
  • Page 198 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(login-protect)# show mac- table <<alias>> Syntax: del <mac> Description: To delete the mac alias entry. Argument: <mac> : mac address, format: 00-02-03-04-05-06 Possible value: <mac> : mac address...
  • Page 199 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To display the mac alias entry. Argument: None. Possible value: None. Example: ES-2126+(mac-table-alias)# show MAC Alias List MAC Address Alias ----- ----------------- ---------------- 00-02-03-04-05-06 aaa 00-33-03-04-05-06 ccc <<information>>...
  • Page 200 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ---------------- ----------------- ---- ---- --------- -------- 00-40-c7-88-00-06 0 Dynamic ES-2126+(mac-table-information)# show Syntax: show Description: To display all mac table information. Argument: None. Possible value: None. Example: ES-2126+(mac-table-information)# show...
  • Page 201 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Possible value: <time> : 10-1000000 seconds or 0 Example: ES-2126+(mac-table-maintain)# set aging 300 set learning Syntax: set learning <port> <num> Description: To set up the maximum amount of MAC that each port can learn.
  • Page 202 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ------ ------------------------- 8191 8191 8191 8191 8191 8191 8191 8191 8191 8192 8192 <<port-security>> disable Syntax: disable <range> Description: To disable port security for a port. Argument: <range> : Number of port that you want to disable.
  • Page 203 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To enable port security for a port. Argument: <range> : number of port that you want to enable. Possible value: <range> : 1 - 26 Example: ES-2126+(mac-table-port-security)# enable 2...
  • Page 204 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable ...(q to quit) <<port>> Syntax: add <mac> <vid> <queue> Description: To enable a static mac entry for a port.
  • Page 205 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) del <mac> Description: To delete a static mac entry for a port. Argument: <mac> : mac adress Possible value: <mac> : format 01-02-03-04-05-06 (alpha numeric characters) Example: ES-2126+(mac-table-port-security-port-2)#...
  • Page 206 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <vid>: VLAN id, from 1 to 4094 <queue>: which queue you want to set, from 0 to 3 <rule> : forwarding rule, from 0 to 2 0:static 1:drop destination address matches 2:drop source address matches <port>...
  • Page 207 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) None. Possible value: None. Example: ES-2126+(mac-table-static-mac)# show Queue Forwarding Rule Port ------ --------------------------- ------ -------- --- --------------------------------- ------- 00-40-C7-D6-00-01 Static with Destination Drop management Syntax: Usage: set [<name> <value>] [<vid> <value>] [<ip> <value>] [<port>...
  • Page 208 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) [<type> <value>] Access type. <action> <value> a(ccept) or d(eny). Possible value: [<name> <value>] No default and it must be set. [<vid> <value>] The range is 1-4095 and can be set to any.
  • Page 209 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Name : Tom VlanID : 2 IP : 192.168.1.30-192.168.1.80 Type : SNMP Action : Deny Port : 1,2 ES-2126+(management)# delete 1 ES-2126+(management)# show Security rule list is empty now edit the specific management policy entry.
  • Page 210 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) [<vid> <value>] The range is 1-4095 and can be set to any. [<ip> <value>] For example, 192.168.1.90-192.168.1.90 or any [<port> <value>] For example, 1 or 1-8 or 1,3-5 or any [<type>...
  • Page 211 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set priority Syntax: set priority <port-range> <priority> Description: To set the PoE priority on ports. Argument: <port-range>¡G <priority>: set priority as 0:Low, 1:Normal, 2:High Possible value: <port range>: 1 to 24 <priority>: 0, 1 or 2...
  • Page 212 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(poe)# show Vmain : 48.3 V Imain : 0.0 A Pconsume : 0.0 W Power Limit : 185 W Temperature : 37 'C / 98 'F...
  • Page 213 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ------------------------- | -- -- -- -- -- -- -- -- -- -- -- -- Port On | X X X X X X X X X X AC Disconnect Port Off...
  • Page 214 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 15 Normal Enable Normal 16 Normal Enable Normal 17 Normal Enable Normal 18 Normal Enable Normal 19 Normal Enable Normal 20 Normal Enable Normal 21 Normal Enable Normal...
  • Page 215 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <range>: 1 ~ 26 Example: ES-2126+(port)# disable state 12 enable state Syntax: enable state Description: To enable the communication capability of the port. Argument: <range>: port range, syntax 1,5-7, available from 1 to 26 Possible value: <range>: 1 ~ 26...
  • Page 216 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: <range>:port range, syntax 1,5-7, available from 1 to 26 <symmetric>: set its flow control as symmetric <asymmetric>: set its flow control as asymmetric Possible value: <range>: 1 to 26...
  • Page 217 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) show conf Description: To display the each port’s configuration about state, speed-duplex and flow control. Argument: None. Possible value: None. Example: ES-2126+(port)# show conf show desciption Syntax: show description Description: To display the ports’...
  • Page 218 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) 22 port22 show detail- counter Syntax: show detail-counter <#> Description: To display the detail-counter for each port. Argument: <#> : port Possible value: <#> : 1 - 26...
  • Page 219 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) show media <port> Description: To display the module 25 or 26 information. Argument: <port>: available 25, 26 Possible value: <port>: 25, 26 Example: ES-2126+(port)# show media 25 Port 25 Fiber Media Information...
  • Page 220 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To display the summary counting of each port’s traffic. Argument: None. Possible value: None. Example: ES-2126+(port)# show simple-counter show status Syntax: show status Description: To display the port’s current status.
  • Page 221 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Down Enable Enable ----/---- ---- ---- Down Enable Enable ----/---- ---- ---- Down Enable Enable ----/---- ---- ---- Down Enable Enable ----/---- ---- ---- Down Enable Enable ----/----...
  • Page 222 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) None. Possible value: None. Example: ES-2126+(qos)# disable dscp disable qos Syntax: disable qos Description: To disable qos function. Argument: None. Possible value: None. Example: ES-2126+(qos)# disable qos disable tos...
  • Page 223 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(qos)# enable 1p enable dscp Syntax: enable dscp Description: To enable IP DSCP qos. Argument: None. Possible value: None. Example: ES-2126+(qos)# enable dscp...
  • Page 224 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To enable IP TOS qos. Argument: None. Possible value: None. Example: ES-2126+(qos)# enable tos set dscp Syntax: dscp [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>] Description: To set IP DSCP qos weighting for 4 queues.
  • Page 225 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) You don't need to use all of queues, but must assign queues in order. Syntax: 1,2 or 2,5-7, available from 0 to 7. Possible value: <priority>: 0 to 7.
  • Page 226 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3. <priority>: priority level. One queue has been assigned 2 different priorities. You don't need to use all of queues, but must assign queues in order (from low queue to high queue).
  • Page 227 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) None. Example: ES-2126+(qos)# show dscp ip diffserv classification ==================== Global QoS mode: Enable QoS Disable 802.1p Priority Disable ip tos classification Enable ip diffserv classification Scheduling: weighted round robin method.
  • Page 228 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) show port Syntax: show port Description: To show VIP port configuration. Argument: None. Possible value: None. Example: ES-2126+(qos)# show port Port Based Priority ====================...
  • Page 229 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Global QoS mode: Enable QoS Enable 802.1p Priority Disable ip tos classification Disable ip diffserv classification Port No Mode Port No Mode -------- ------- --------- ------- Enable Enable...
  • Page 230 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) weight: wrr 0 = 1; wrr 1 = 1; wrr 2 = 8; wrr 3 = 16. weighted range: 1~55. P0~7: Priority 0~7. Default mode: Queue0: P0,P1; Queue1: P2,P3; Queue2: P4,P5;...
  • Page 231 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Scheduling: weighted round robin method. weight: wrr 0 = 1; wrr 1 = 1; wrr 2 = 8; wrr 3 = 16. weighted range: 1~55. P0~7: Priority 0~7.
  • Page 232 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) reboot reboot Syntax: reboot Description: To reboot the system. Argument: None. Possible value: None. Example: ES-2126+# reboot security <<isolated-group>> Syntax: set <port> Description: To set up the function of the isolated group.
  • Page 233 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) None. Possible value: None. Example: ES-2126+(security-isolated-group)# show Isolated group: 2 3 4 <<mirror>> disable Syntax: disable Description: To disable the function of mirror. Argument: None. Possible value: None.
  • Page 234 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set <spy> <ingress> <egress> Description: To set up the monitoring port and monitored ports of the mirror function. User can monitor the ports that receive or transmit the packets.
  • Page 235 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) snmp disable Syntax: disable set-community disable snmp Description: The Disable here is used for the de-activation of snmp or set-community. Argument: None. Possible value: None. Example: ES-2126+(snmp)# disable set-community...
  • Page 236 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: The Set here is used for the setup of get-community, set-community, trap host ip, host port and trap- community. Argument: <#>: trap number, range: 1 to 6 <ip>: ip address or domain name...
  • Page 237 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community:...
  • Page 238 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ES-2126+(stp)# disable enable Syntax: enable Description: To enable the function of STP. Argument: None. Possible value: None. Example: ES-2126+(stp)# enable set config Syntax: set config <Bridge Priority> <Hello Time> <Max. Age> <Forward Delay>...
  • Page 239 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set port Syntax: set port <range> <path cost> <priority> <edge_port> <admin p2p> Description: To set up the port information of STP. Argument: <range>: syntax 1,5-7, available from 1 to 26 <path cost>: 0, 1-200000000.
  • Page 240 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To display the STP configuration data. Argument: None. Possible value: None. Example: ES-2126+(stp)# show config STP State Configuration : Spanning Tree Protocol : Enabled Bridge Priority (0-61440) : 61440 Hello Time (1-10 sec) Max.
  • Page 241 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) DISCARDING 2000000 Auto DISCARDING 2000000 Auto DISCARDING 2000000 Auto DISCARDING 2000000 Auto DISCARDING 200000 Auto DISCARDING 200000 Auto DISCARDING 20000 Auto DISCARDING 20000 Auto show status Syntax: show status Description: To display of the status of STP.
  • Page 242 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Bridge Priority : 61440 Designated Root : 00:40:C7:D8:09:1D Designated Priority : 61440 Root Port Root Path Cost Current Max. Age(sec) : 20 Current Forward Delay(sec) : 15 Hello Time(sec)
  • Page 243 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(system)# set device-name CR-2600 set location Syntax: set location <location> Description: To set the location description of the switch. Argument: <location>: string length up to 40 characters Possible value: <location>: A, b, c, d, ...
  • Page 244 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) BIOS Version : v1.05 Firmware Version : v2.07 Hardware-Mechanical Version : v1.01-v1.01 Serial Number : 031203000004 Host IP Address : 192.168.1.1 Host MAC Address : 00-00-8c-00-d8-00 Device Port...
  • Page 245 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Authorization : Enable Fallback to Local Authorization: Enable Accounting : Enable Secret Key: secret Server IP - --------------- 1 10.1.1.1 2 0.0.0.0 enable Syntax: enable <argument> Description: Enables the TACACS+ functions for accounting, authorization and fallback to local authorization.
  • Page 246 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Sets the primary and secondary access mode for the login via console (outband). Arguments: Method from 0 to 2: 0: Authentication via local user accounts of the device.
  • Page 247 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(tac-plus)# set key secret Sets the encryption key to “secret”. set retry Syntax: set retry <retry> Description: Sets the access retry value. When the login failed for the number of retries, the secondary login method will be used.
  • Page 248 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Sets the primary access mode for the login via telnet to TACACS+ and the secondary access mode to local user accounts. set web- access Syntax: set web-access <method1> <method2>...
  • Page 249 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) show Syntax: show Description: To display the information of tftp server. Argument: None. Possible value: None. Example: ES-2126+(tftp)# show Tftp Server : 192.168.3.111 time set daylightsaving Syntax: set daylightsaving <hr> <MM/DD/HH> <mm/dd/hh>...
  • Page 250 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <mm> : (01-12) <dd> : (01-31) <hh> : (00-23) Example: ES-2126+(time)# set daylightsaving 3 10/12/01 11/12/01 set manual Syntax: set manual <YYYY/MM/DD> <hh:mm:ss> Description: To set up the current time manually.
  • Page 251 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Synchronizing...(1) Synchronization success show Syntax: show Description: To show the time configuration, including “Current Time”, “NTP Server”,” Timezone”, ” Daylight Saving”,” Daylight Saving Start” and “Daylight Saving End”...
  • Page 252 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) ES-2126+(trunk)# del trunk 1 set hash Syntax: set hash <method> Description: To set up trunk hash method. Argument: <method>: lacp hash method 0: DA and SA 1: SA 2: DA Note : This hash method applies to both LACP and static trunk.
  • Page 253 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To set up the status of trunk, including the group number and mode of the trunk as well as LACP mode. Argument: <port-range> : syntax 1,5-7, available from 1 to 26 <method>: <static|lacp>...
  • Page 254 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Member Ports: 1 Ready Ports:1 Aggregator 2) Method: LACP Member Ports: 2 Ready Ports: show lacp-config Syntax: show lacp-config Description: To display the value of LACP Priority. Argument: None.
  • Page 255 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(trunk)# show lacp-detail 2 Aggregator 2 Information: Actor Partner --------------------------------- -------------------- ------------- System Priority MAC Address System Priority Address --------------- ----------------- --------------- ---- ------------- 32768 00-40-c7-e8-00-02 32768...
  • Page 256 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) port Method Group Active LACP Aggtregator Status ====== ======== ======= ============= ============= ======== None Active Ready LACP Active LACP Active LACP Active LACP Active None Active None Active...
  • Page 257 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) VLAN del port- group Syntax: del port-group <name> Description: To delete the port-based VLAN group. Argument: <name>: port-VLAN name Possible value: <name>: port-VLAN name Example: ES-2126+(VLAN)# del port-group VLAN-2...
  • Page 258 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Example: ES-2126+(VLAN)# disable double-tag disable drop- untag Syntax: disable drop-untag <port_range> Description: To disable drop-untag. Argument: <port_range>: which port(s) you want not to drop untagged frames. Syntax: 1,5-7, available from 1 to 26 Possible value: <port_range>: 1 to 26...
  • Page 259 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Possible value: None. Example: ES-2126+(VLAN)# disable symmetric enable double- tag Syntax: enable double-tag Description: To enable double-tag. Argument: None. Possible value: None. Example: ES-2126+(VLAN)# enable double-tag enable drop- untag Syntax: enable drop-untag <port_range>...
  • Page 260 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(VLAN)# enable svl enable symmetric Syntax: enable symmetric Description: To drop frames from the non-member port. Argument: None. Possible value: None. Example:...
  • Page 261 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) set mode <port|tag> Description: To switch VLAN mode between port-based and tag-based modes. Argument: <port|tag>: port or tag tag: set tag-based VLAN port: set port-based VLAN Possible value: <port|tag>: port or tag...
  • Page 262 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) <default_priority>: which priority you want to set, available from 0 to 7 Possible value: <port_range>: 1 to 26 <pvid>: 1 to 4094 <default_priority>: 0 to 7 Example: ES-2126+(VLAN)# set pvid 3,5,6-8 5 6...
  • Page 263 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Argument: None. Possible value: None. Example: ES-2126+(VLAN)# show config Current VLAN mode:Tag-based VLAN Global setting: Symmetric VLAN : Disable (Asymmetric) : Disable (IVL) Double tag : Disable show group...
  • Page 264 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Untag :1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2) Name :VLAN-2...
  • Page 265 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable disable Syntax: disable Description: To disable the virtual stack. Argument: None. Possible value: None.
  • Page 266 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) To enable the virtual stack. Argument: None. Possible value: None. Example: ES-2126+(vs)# enable set gid Syntax: set gid <gid> Description: To set the group id. Argument: <gid>: group ID Possible value: <gid>: a-z,A-Z,0-9...
  • Page 267 LANCOM ES-2126+ und LANCOM ES-2126P+ Kapitel 5: Operation of CLI Management (englisch) Description: To display the configuration of the virtual stack. Argument: None. Possible value: None. Example: ES-2126+(vs)# show Virtual Stack Config: State : Enable Role : Master Group ID : group1...

  • Page 268: Appendix

    LANCOM ES-2126+ and LANCOM ES-2126P+ Chapter 6: Appendix 6 Appendix Performance data and specifications LANCOM ES-2126+ LANCOM ES-2126P+ Performance Switching technology Store and forward with latency less than 5 μs MAC addresses Support of max 8K MAC addresses Throughput max. 8.8 Gbps on the backplane...
  • Page 269 LANCOM ES-2126P+ CE conformity according to EN 55022, EN 55024, EN 60950 Environment Temperature range 0–40°C; humidity 5–90%; non-condensing Accessories 1000Base-SX SFP module, LANCOM SFP-SX-LC1, item no. 61556 1000Base-LX SFP module, LANCOM SFP-LX-LC1, item no. 61557 Service 5 years Support...

  • Page 270: Connector Wiring

    PoE/ -48 V PoE/ -48 V CE-declarations of conformity LANCOM Systems herewith declares that the devices of the type described in this documentation are in agreement with the basic requirements and other relevant regulations of the 1995/5/EC directive. The CE declarations of conformity for your device can be found on the relevant...

This manual is also suitable for:

Es-2126p+

Table of Contents