Table of Contents
Advertisement
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
106
Port Control: This is used to set the operation mode of authorization.
There are three type of operation mode supported, ForceUnauthori-
zed, ForceAuthorized, Auto.
ForceUnauthorized:
The controlled port is forced to hold in the unauthorized state.
ForceAuthorized:
The controlled port is forced to hold in the authorized state.
Auto:
The controlled port is set to be in authorized state or unauthorized
state depends on the result of the authentication exchange bet-
ween the authentication server and the supplicant.
Default: Auto
reAuthMax(1-10): The number of authentication attempt that is per-
mitted before the port becomes unauthorized.
Default: 2
txPeriod(1-65535 s):A time period to transmitted EAPOL PDU bet-
ween the authenticator and the supplicant.
Default: 30
Quiet Period(0-65535 s): A period of time during which we will not
attempt to access the supplicant.
Deafult: 60 seconds
reAuthEnabled: Choose whether re-authentication will take place in
this port.
Default: ON
reAuthPeriod(1-65535 s): A non-zero number seconds between the
periodic re-authentication of the supplicant.
Default: 3600
max. Request(1-10): The maximum of number times that the authen-
ticator will retransmit an EAP Request to the supplicant before it times
out the authentication session. The valid range: 1 – 10.
Default: 2 times
suppTimeout(1-65535 s): A timeout condition in the exchange bet-
ween the authenticator and the supplicant. The valid range: 1 –
65535.
Advertisement
Table of Contents
