State - Lancom ES-2126+ Manual

LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
Network Access Server (NAS): It does not check the user data itself; rather, the
data is forwarded to the central AAA server, which responds by checking the
data and answering with an accept or a reject.
TACACS+ is configured with the following parameters:
4.13.2

State


108
User ID
Accept
PC
Configures the TACACS+ server and sets the password for the encryption
of data communications with the TACACS+ protocol.
Server 1: Address of the TACACS+ server to which requests for
authentication, authorization and accounting are to be forwarded.
The value 0.0.0.0 deactivates this entry.
Server 2: You can optionally configure a second TACACS+ server
address here. If the first TACACS+ server is not available and the
maximum number of failed login attempts is reached, the device
forwards its login requests to the alternative TACACS+ server. The
maximum number of failed login attempts is set as the "Access retry"
value under the "Access" menu item.
The value 0.0.0.0 deactivates this entry.
Secret key: The password for encrypting the communications between
NAS and TACACS+ servers.
The password must be entered identically into the LANCOM and the
TACACS+ server. We recommend that you do not operate TACACS+
without encryption.
User ID
Accept
NAS AAA-SERVER