Static Ip Multicast; Group Limit - Lancom ES-2126+ Manual

Edit: The existed entry also can be modified after pressing <Edit> but-
ton.
Delete: Remove the existed entry of allowed group configuration from
the allowed group.
4.7.3

Static IP Multicast

Here you can define mac table entries manually, which the device cannot learn
automatically, for example.
Parameter:
IP Adress:
The ip address of the manually defined multicast group.
VLAN ID:
VLAN, to which this ip address belongs. 0 to 4094.
Member Port:
The device leads incoming packets with the defined ip multicast
address to this ports.
4.7.4

Group Limit

The Group limit table is used to define the maximum number of IGMP groups
to be given access to a port. Enter the maximum number of groups with access
rights into the field "Group limit". If this limit is reached, further requests to
the associated layer-2 interface are ignored and the associated data streams
are dropped.
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
63