E-Mail - Lancom ES-2126+ Manual

VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swap-
ped
PoE: PoE Failure
4.14.2

E-Mail

Alarm configuration is used to configure the persons who should receive the
alarm message via email. It depends on your settings. An email address has
to be set in the web page of alarm configuration. Then, user can read the trap
information from the email. This function provides 6 email addresses at most.
The 22 different trap events will be sent out to SNMP Manager when trap
event occurs. After ticking trap events, you can fill in your desired email
addresses numbers. Then, please click <Apply> button to complete the alarm
configuration. It will take effect in a few seconds.
Parameter Description:
Email:
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
Mail Server: the IP address of the server transferring your email.
Username: your username on the mail server.
Password: your password on the mail server.
Email Address 1 – 6: email address that would like to receive the
alarm message.
113