Lancom ES-2126+ Manual page 103

LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
Port Mode Port Control
Disable Don't Care
Multihost Auto
Multihost Auto
Multihost ForceUnauthorized
Multihost ForceAuthorized
Table 3-3
802.1x State Setting
This function is used to configure the global parameters for RADIUS authen-
tication in 802.1x port security application.
102
Parameter Description:
Radius Server: RADIUS server IP address for authentication.
Default: 192.168.1.1
Port Number: The port number to communicate with RADIUS server
for the authentication service. The valid value ranges 1-65535.
Default port number is 1812.
Secret Key: The secret key between authentication server and authen-
ticator. It is a string with the length 1 – 31 characters. The character
string may contain upper case, lower case and 0-9. It is character
sense. It is not allowed for putting a blank between any two charac-
ters.
Default: Radius.
Authentication Port Status
Don't Care Port Uncontrolled
Successful Port Authorized
Failure Port Unauthorized
Don't Care Port Unauthorized
Don't Care Port Authorized