Description - Lancom ES-2126+ Manual

LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
Media type NWay
100M TP ON/OFF
1000M TP ON/OFF
1000M Fiber ON/OFF
4.3.3

Description

Here you can enter descriptions for the ports.
50
Speed
10/100M
10/100/1000M
1000M
In Auto-negotiation mode, no default value. In Forced mode, default
value depends on your setting.
Flow Control: There are two modes to choose in flow control, inclu-
ding Symmetric and Asymmetric. If flow control is set Symmetric, both
parties can send PAUSE frame to the transmitting device(s) if the
receiving port is too busy to handle. When it is set Asymmetric, this
will let the receiving port care the PAUSE frame from transmitting
device(s), but it doesn't send PAUSE frame. This is one-way flow con-
trol.
Default: Symmetric.
Duplex
Full/Half
Full for all, Half for 10/100
Full