Table of Contents
Advertisement
Member: This is used to enable or disable if a port is a member of the
new added VLAN, "Enable" means it is a member of the VLAN. Just
tick the check box beside the port x to enable it.
Add Group: Input the VLAN name, VID and then choose the member by ticking
the check box beside the port No. to create a new Tag-based VLAN. As to the
parameter of Untag, it stands for an egress rule of the port. If you tick the
check box beside the port No., packets with this VID outgoing from this port
will be untagged. Finally, press the <Apply> button to have the setting taken
effect.
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
71
Advertisement
Table of Contents
