Table of Contents
Advertisement
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
trator's identity, can only monitor the system. For those who have no adminis-
trator's identity, can only monitor the system. There are only a maximum of
three users able to login simultaneously in the switch.
To optimize the display effect, we recommend you use Microsoft IE 6.0 above
or current FireFox and have the resolution 1024x768. The switch supported
neutral web browser interface.
4.1
Web Management Home Overview
After you login, the switch shows you the system information. This page is
default and tells you the basic information of the system, including "Model
Name", "System Description", "Location", "Contact", "Device Name", "System
Up Time", "Current Time", "BIOS Version", "Firmware Version", "Hardware-
Mechanical Version", "Serial Number", "Host IP Address", "Host MAC
Address", "Device Port", "RAM Size" and "Flash Size". With this information,
you will know the software version used, MAC address, serial number, how
many ports good and so on. This is helpful while malfunctioning.
The Information of Page Layout
On the top side, it shows the front panel of the switch. In the front panel, the
linked ports will display green; as to the ports, which are link off, they will be
dark. For the optional modules, the slot will show only a cover plate if no
module exists and will show a module if a module is present. The image of
module depends on the one you inserted. The same, if disconnected, the port
will show just dark, if linked, green.
31
Advertisement
Table of Contents
