Lancom ES-2126+ Manual page 105

LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
Port Security Management
Shows each port status. In Multihost mode, it shows the port number and its
status, authorized or unauthorized.
104
Parameter Description:
Disable Mode: When selecting Disable mode for a port in the function
802.1X Port Mode Configuration, the port is in the uncontrolled port
state and does not apply 802.1X authenticator on it. Any node
attached on this port can access the network without the admittance
of 802.1X authenticator. The Port Status will show the following
screen.
Port Number:The port number to be chosen to show its 802.1X Port
Status. The valid number is Port 1 – 26.
Port Status: The current 802.1X status of the port. In Disable mode,
this field is Disabled.
802.1x with Multihost mode: When selecting 802.1x with Multihost
mode for a port in the function 802.1X Port Mode Configuration,
Devices can access the network through this port once the authenti-
cator is authorized. The Port Status will show the following screen. If