Table of Contents
Advertisement
Monitored Ingress Port: Set up the port for being monitored. It only
monitor the packets received by the port you set up. Just tick the check
box (ž) beside the port x and valid port is Port 1~26.
Monitored Egress Port: Set up the port for being monitored. It only
monitor the packets transmitted by the port you set up. Just tick the
check box (ž) beside the port x and valid port is Port 1~26.
Function name:
4.16.2
Isolated Group
Isolated Group function can let the port be independent of other ports in the
Isolated group, and the communication is also forbidden between these ports.
But, the ports of the Isolated group are still able to communicate with the
ports of the non-Isolated group. With this design, it will be helpful to the
administrator to immediately find and solve the port that results in the occur-
rence of looping problems in the network.
Parameter Description:
Mode: Used for the activation or de-activation of Isolated Group func-
tion. Default is disable
Isolated Group: User can choose any port to be the member of this
group. Just tick the check box (ž) beside the port x and valid port is
Port 1~26. In this group, all of these member ports cannot forward
packets with each other. Thus, the switch will not be capable of for-
LANCOM ES-2126+ and LANCOM ES-2126P+
Chapter 4: Operation of Web- based Management
115
Advertisement
Table of Contents
