Lancom ES-2126+ Manual page 224

To enable IP TOS qos.
Argument:
None.
Possible value:
None.
Example:
ES-2126+(qos)# enable tos
set dscp
Syntax:
set dscp [<q0><priority>]
[<q3><priority>]
Description:
To set IP DSCP qos weighting for 4 queues.
Argument:
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different
priorities.
You don't need to use all of queue, but must assign queue in order.
Syntax: 1,2 or 2,5-7, available from 0 to 63.
Possible value:
<priority>: 0 to 63
Example:
ES-2126+(qos)# set dscp q0 2 q1 2 q2 2 q3 3
set pri-tag
Syntax:
set pri-tag [<q0><priority>] [<q1><priority>] [<q2><priority>]
[<q3><priority>]
Description:
To set 802.1p qos weighting for 4 queues.
Argument:
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different
priorities.
LANCOM ES-2126+ und LANCOM ES-2126P+
Kapitel 5: Operation of CLI Management (englisch)
[<q1><priority>] [<q2><priority>]
223