Configuring And Monitoring The Lancom Switch; Configuration Options; Starting Webconfig - Lancom GS-2124 User Manual

LANCOM GS-2124
Chapter 3: Configuring and monitoring the LANCOM Switch
3 Configuring and monitoring the LANCOM
Switch
3.1

Configuration options

There are two different methods of configuring the device.
3.1.1

Starting WEBconfig

There are two ways of starting the configuration by browser:
18
By means of a graphical user interface or via a browser (WEBconfig). This
option is only available if you have network access to the device's IP
address from your computer.
Instructions for configuring the device with WEBconfig are available in the
chapter "Web-based configuration".
Text-orientated configuration via a console (Command Line Interface –
CLI): This method of configuration, which requires a program such as Tel-
net, Hyperterminal, or similar, can be conducted over a network connec-
tion or with a direct connection via serial interface (RS-232).
Instructions for configuring the device with CLI are available in the chap-
ter "Command line interface".
If you know the device's IP address, simply enter this into the address line
in the browser. The factory settings for accessing the device are: User
name "admin", password "admin".