Table of Contents
Advertisement
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different
priorities.
You don't need to use all of queues, but must assign queues in order
(from low queue to high queue).
Syntax: 1,2 or 2,5-7, available from 0 to 7.
Possible value:
<type_value>: 0~3
<priority>: 0 to 7.
Example:
ES-2126+(qos)# set tos 0 q0 1 q1 2 q2 4 q3 6
set vip
Syntax:
set vip <port_range> <mode>
Description:
To set vip port for strict priority.
Argument:
<port_range>: syntax 1,5-7, available from 1 to 26
<mode>: enable/disable vip port for each port. 1: enable. 0: disable.
Possible value:
<port_range>: 1 to 26
<mode>: 1 or 0
Example:
ES-2126+(qos)# set vip 1-6 1
show dscp
Syntax:
show dscp
Description:
To show IP DSCP Qos configuration.
Argument:
None.
Possible value:
LANCOM ES-2126+ und LANCOM ES-2126P+
Kapitel 5: Operation of CLI Management (englisch)
225
Advertisement
Table of Contents
