Fsdelete Command - Xerox DocuPrint NC60 Administrator's Manual

FSDELETE Command

Syntax @PJL FSDELETE NAME = "pathname" [<CR>] <LF>
Parameters Parameter
NAME="pathname"
NAME = "pathname" — where "pathname" has the same parameters as the
FSDOWNLOAD command (see page 3-4).
The FSDELETE command is used to delete files from the
DocuPrint NC60 file system.
Functional Range
ASCII 01 thru 255
Downloading Fonts and Macros
N/A
Chapter 3: Using the Hard Drive
Default
3-7