General Information; Scope Of Supply; Warranty; Trademarks - Burkert 8718 Operating Instructions Manual

Type 8718, 8719 / 8708, 8709

General Information

4. GENERAL INFORMATION
4.1.

Scope of Supply

Check immediately upon receipt of the delivery, that the contents are not damaged and that the type and
scope agree with the delivery note and packing list.
If there are any discrepancies, please contact us immediately.
Germany
Contact address:
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13–17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed operating instructions.
And also on the internet at:
country.burkert.com
4.2.

Warranty

This document contains no promise of guarantee. Please refer to our general terms of sales and delivery.
The warranty is only valid if the LFC / LFM Types 8718, 8719 / 8708, 8709 are used as intended in
accordance with the specified application conditions.
The warranty extends only to defects in the LFC / LFM Types 8718, 8719 / 8708, 8709 and its
components.
We accept no liability for any kind of collateral damage which could occur due to failure or mal-
function of the device.
4.3.

Trademarks

The brands listed below are trademarks of the corresponding companies / associations / organisations
PROFIBUS PROFIBUS Nutzerorganisation e. V.
CANopen CiA CAN in Automation
english
9