5
08.02
5.3 Stock removal/grooving cycles in STOCK REMOVAL mode
5.3.2 Grooving cycles
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
Function
With grooving cycles you can produce symmetrical and asymmetrical
grooves for longitudinal and face machining on any straight contour
elements. You can machine internal or external grooves.
X
You can select one of three groove cycles with the soft keys in
operating mode STOCK REMOVAL.
Turning with Cycles
Z
5
5-105