12
Examples
12.2 Example 2: External machining with sphere
Result
3. Blank contour input
with contour calculator
Result
12-190
• Call
CONTOUR mode
New
• Press soft key
contour
• Input blank contour name (here: Cont_121) and confirm
• Blank contour start point
• Press soft key
• Enter the following contour elements and confirm each time by
pressing soft key
1.
X: 60
2.
Z: -60
3.
X: 86
4.
Z: -87
5.
X: 0
6.
Z: 0
X0: 0
FRCM: –
:
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
12
08.02
Z0: 0