Download  Print this page

Advertisement

5
Turning with Cycles
5.2 Turning cycles in CYCLE mode
P (alternative)
Right-hand/left-hand
thread (alternative)
Z0
Z1
5-96
Explanation of parameters
Thread lead, freely definable
mm/rev
inch/rev
Module
Turns/" (thread turns per inch)
Thread direction
Reference point Z
Thread depth
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
5
08.02

Advertisement

   Also See for Siemens SINUMERIK 840DE

Comments to this Manuals

Symbols: 0
Latest comments: