Alarms and Messages
11.2 Alarms with ManualTurn
Start with valid reference point only
The axes have no valid reference point.
Reference all axes
4th axis not configured, that is, no powered tool possible
MD9643 CTM_ENABLE_DRIVEN_TOOL was activated, without a 4th
axis being known to the system.
Create a 4th axis. To do this, change the following machine data:
20070 $MC_AXCONF_MACHAX_USED =4
• Axis-specific for the 4th axis
30320 $MA_DISPLAY_IS_ MODULO=1
Faulty graphics data
Exit graphic and start again
More data have been generated than the operator interface can read.
Deselect graphic and select again.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition