Siemens SINUMERIK 840DE Operation & Programming Manual page 121

6
08.02
Creating a new contour
Contour
new
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
6.6 Editing contour elements
Press soft key "Contour new".
Once you have confirmed the prompt again (soft key "OK" or "Return")
by pressing the "OK" soft key, you can start a new contour.
The contour you have already defined is stored under the name you
have given it.
Turning any Contours (Free Contour Input)
6
6-121