Offsets; General Notes - Siemens SINUMERIK 840DE Operation & Programming Manual

Hide thumbs Also See for SINUMERIK 840DE:
Table of Contents

Advertisement

3
08.02
3.4

Offsets

3.4.1 General notes

Overview
Preset
Actual position
Zero offset N1...N4
Manual offset
Chuck dimension
Tool offset
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
Function
z+
Preset
z+
X+
Zero offset 1...4
X+
You can redefine the reference point for the axis movements and the
actual value display with the function "Preset".
You can numerically enter four zero offsets. If required, you can then
activate one of the zero offsets.
A manual offset is automatically stored if the axes are additionally
traversed using the handwheel during a cycle or if an offset is stored
during an interruption.
Chuck dimension is an additive zero offset and refers to the zero
offset currently set.
The tool offset has the same effect as a zero offset.
Preparatory Functions for Machining

3.4 Offsets

z+
Chuck
z+
dimension
Manual
X+
offset
X+
Actual
Programmed
position
position
Tool
offset
3
z+
X+
3-47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840dSinumerik 810dSinumerik 810de

Table of Contents