Download  Print this page

Advertisement

6
08.02
Straight
Circular arc
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
Explanation of contour elements
Direction/
Parameter
X
End point in
Z
Z -direction (+,–)
L
α1
Transition angle: Preceding/current contour element
α2
α2 = 0: Tangential transition to preceding element
Transition to
"Radius" or "Chamfer" as transition element
following
can be selected with the "Alternat." soft key.
element
FB
Parameters
Definition
Rotational
In clockwise/counterclockwise direction
direction
R
Radius
X
End point in X direction (+,–)
Z
End point in Z direction (+,–)
I
X coordinate of circle center
K
Z coordinate of circle center
α1
Start angle
β1
End angle
Transition angle: Preceding element/current
α2
contour element
β2
Arc angle
Transition to
"Radius" or "Chamfer" as transition element can
following
be selected with the "Alternat." soft key.
element
FB
Feed of the arc
Turning any Contours (Free Contour Input)
6.5 Create contour elements
End point in
X -direction (+,–)
Length of straight line
Angle of lead
Feed of the straight line
6
End point in
X and Z directions
6-117

Advertisement

   Also See for Siemens SINUMERIK 840DE

Comments to this Manuals

Symbols: 0
Latest comments: