Download  Print this page

Single-cycle Machining - Siemens SINUMERIK 840DE Operation & Programming Manual

Hide thumbs

Advertisement

6
08.02
6.9

Single-cycle machining

Finish
Modify
contour
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
Function
A contour can also be machined as a single cycle. Prerequisite is that
no program is selected (see Section "Switching off program").
Sequence of operations
Create a contour via soft key "New contour".
Define the individual contour elements (see Section "Create contour
elements").
Complete the contour with "Finish". You return to the basic soft key
menu of CONTOUR mode.
Select "Stock removal" and enter the parameters.
Start machining by pressing the "NC Start" key.
Activate soft key "Residual material" if necessary, enter the values in
the parameterization screenform and start machining by pressing "NC
Start".
In order to modify the created contour, press soft key "Modify contour"
in the basic soft key menu. The R parameter input screenform is
overlaid.
Turning any Contours (Free Contour Input)
6.9 Single-cycle machining
6
n
6-127

Advertisement

   Also See for Siemens SINUMERIK 840DE

Comments to this Manuals

Symbols: 0
Latest comments: