Siemens SINUMERIK 840DE Operation & Programming Manual page 4

SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A .... New documentation.
B .... Unrevised edition with new Order No.
C .... Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated by a
new edition coding in the header on that page.
Edition Order No.
06.97 6FC5298-2AD00-0BP0
12.97 6FC5298-2AD00-0BP1
07.98 6FC5298-2AD00-0BP2
02.00 6FC5298-5AD00-0BP0
08.00 6FC5298-5AD00-0BP1
08.02 6FC5298-6AD00-0BP0
This manual is included in the documentation available on CD ROM (DOCONCD)
Edition Order No.
11.02 6FC5 298-6CA00-0BG3
Trademarks
®
SIMATIC , SIMATIC HMI
trademarks of Siemens AG. Other product names used in this documention may be trademarks which, if used
by third parties, could infringe the rights of their owners.
Further information is available on the Internet under:
http:/www.a&d.siemens.de/sinumerik
This publications was produced with WinWord V8.0 and Designer V7.0.
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model
or design, are reserved.
© Siemens AG, 1997, 1998, 2000, 2002. All rights reserved
Order No. 6FC5298-6AD00-0BP0
Printed in Germany
® ®
, SIMATIC NET , SIROTEC
Remarks
A
C
C
C
C
C
Remarks
C
® ®
, SINUMERIK and SIMODRIVE
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
We have checked that the contents of this document correspond to the hardware
and software described. Nonetheless, differences might exist and therefore we
cannot guarantee that they are completely identical. The information contained in
this document is, however, reviewed regularly and any necessary changes will be
included in the next edition. We welcome suggestions for improvement.
Subject to change without prior notice
Siemens Aktiengesellschaft
®
are registered