Alarms and Messages
11.2 Alarms with ManualTurn
Alarms with ManualTurn
11.2.1 Overview of alarms
Overview of alarms
11.2.2 Selecting the alarm/message overview
If an illegal status is recognized in ManualTurn an alarm is generated
and machining aborted.
The error text that is displayed together with the alarm number gives
more detailed information about the cause of the fault.
Carefully check the installation using the description of the alarm that
has been triggered. Eliminate the cause of the alarm and acknowledge
the alarm in the way described. Non-observance could result in danger
to the machine, workpiece, stored settings and, in certain circumstan-
ces, to your health.
If you are in CNC mode, refer to the following alarm descriptions:
/DA/ Diagnostics Guide
You can display and acknowledge alarms and messages.
Sequence of operations
The alarm/message overview displays all queued alarms and
messages, together with the numbers, date/time and a description.
You acknowledge the alarm/message with the "NC Reset" soft key.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition