12
Examples
12.1 Example 1: External machining with groove and thread
Result
8. Completed EasyStep
program
12-188
Number of cuts
Insertion depth
Finishing allowance
Lift in X
Starting angle offset
• Press soft key
Switch from the programming graphics to the flow chart by pressing
the
key:
AS: 14
E: 0.24
U: 0
V: 2
Q: 0
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
12
08.02