5
Turning with Cycles
5.3 Stock removal/grooving cycles in STOCK REMOVAL mode
Precondition
5-106
Sequence of operations
Select STOCK REMOVAL mode and call the required grooving cycle
by pressing the soft key.
Simple grooving cycle
Grooving cycle with conicals, radii
and chamfers
Grooving cycle in a conical with
conicals, radii and chamfers
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
5
08.02