Storing Thread Undercut And Thread Cycles; Insert A Contour In Easystep Machining Sequence - Siemens SINUMERIK 840DE Operation & Programming Manual

8
Parts Program Management

8.4 Storing thread undercut and thread cycles

8.4

Storing thread undercut and thread cycles

Precondition
Directory
Store
input
8.5

Insert a contour in EasyStep machining sequence

Precondition
Directory
8-152
Function
With the soft key "Store input" in menu "Directory", you can store the
parameters you enter in the dialog screenform for the thread undercut
and thread cycles in a file.
Sequence of operations
You have parameterized a thread undercut cycle or a thread cycle.
Press the soft key "Directory" in the extended soft key menu.
Press the soft key "Store input"
and
enter a file name in the window "Insert new worksheet". Store the file
name by pressing the "Input" key or "OK" soft key.
Press soft key "Back" to abandon the function.
Sequence of operations
You have selected the EasyStep machining sequence you wish to
execute.
Use the cursor keys to select the step after which the contour is to be
inserted.
Change to CONTOUR mode.
Press the soft key "Directory".
Use the cursor keys to select the desired contour in the directory.
Activate the "Input" key and the "Accept" soft key. The contour is
inserted at the desired position in the EasyStep machining sequence.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
8
08.02