3
Preparatory Functions for Machining
3.4 Offsets
3.4.4 Delete manual offset
Offset
Delete
man. offs.
3-50
Sequence of operations
Select any operating mode
Select the extended soft key menu by pressing the ">" key
Select the soft key labeled "Offset" in the soft key menu.
All position data are then displayed on the screen.
Select soft key labeled "Delete man. offs."
The function is not executed.
or
The function is executed.
Offset can be deleted if no Start command has been given.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
3
08.02