3
Preparatory Functions for Machining
3.2 Setup
3.2
Setup
3-44
Function
In setup mode, you move the axes with
• the direction and JOG keys or
• the handwheels.
Z+
X+
Sequence of operations
Any operating mode
Start lamp is off or Stop lamp is on
(axes are not in motion)
Select axis direction
Trigger a movement with the JOG keys, e.g. with rapid traverse
Rapid traverse
Normal speed
Creep speed
Fine speed
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
3
08.02