Dodge 2001 Ram 1500 Owner's Manual page 2090

BR/BE
VALVE BODY (Continued)
(12) Secure detent ball and spring with Retainer
Tool 6583 (Fig. 274).
(13) Remove park rod E-clip and separate rod from
manual lever (Fig. 275).
(14) Remove E-clip and washer that retains throt-
tle lever shaft in manual lever (Fig. 276).
(15) Remove manual lever and throttle lever (Fig.
277). Rotate and lift manual lever off valve body and
throttle lever shaft. Then slide throttle lever out of
valve body.
(16) Position pencil magnet next to detent housing
to catch detent ball and spring. Then carefully
remove Retainer Tool 6583 and remove detent ball
and spring (Fig. 278).
(17) Remove screws attaching pressure adjusting
screw bracket to valve body and transfer plate (Fig.
279). Hold bracket firmly against spring tension
while removing last screw.
Fig. 274 Detent Ball And Spring
1 - SPECIAL TOOL 6583 POSITIONED ON DETENT HOUSING
AUTOMATIC TRANSMISSION - 44RE
Fig. 275 Park Rod
1 - MANUAL LEVER
2 - E-CLIP
3 - PARK ROD
Fig. 276 Throttle Lever E-Clip And Washer
1 - THROTTLE LEVER SHAFT
2 - E-CLIP AND WASHER
3 - MANUAL SHAFT
21 - 455