Dodge 2001 Ram 1500 Owner's Manual page 1748

BR/BE
MANUAL - NV5600 (Continued)
Fig. 60 First Gear And Blocker Assembly
1 - OUTPUT SHAFT
2 - 1ST GEAR AND BLOCKER ASSEMBLY
Fig. 61 Output Shaft Thrust Washer
1 - OUTPUT SHAFT
2 - OUTPUT SHAFT THRUST WASHER
MANUAL - NV5600
(21) Install rear output shaft bearing onto the out-
put shaft with Installer 8228 and a shop press (Fig.
62).
(22) Install a new snap-ring to hold the rear out-
put bearing onto the output shaft. Select and install
the thickest snap-ring which will fit into the groove.
Fig. 62 Rear Output Shaft Bearing
1 - INSTALLER 8228
2 - REAR OUTPUT SHAFT BEARING
(23) Reverse output shaft in the Fixture 8227 and
support the shaft with press blocks under first gear.
(24) Install sixth gear bearing onto the output
shaft.
(25) Install sixth gear onto the output shaft and
over the sixth gear bearing (Fig. 63).
(26) Install the sixth gear friction cone onto sixth
gear.
(27) Install sixth gear blocker ring over the sixth
gear friction cone (Fig. 64).
(28) Install Guide 8235 onto the end of the output
shaft (Fig. 65).
(29) Install 5-6 synchro over Guide 8235 and onto
the output shaft (Fig. 66).
(30) Press 5-6 synchro onto the output shaft with
Installer 8156 and a shop press.
(31) Install output shaft pocket bearing onto the
output shaft.
21 - 113