21 - 24
MANUAL - NV3500
MANUAL - NV3500 (Continued)
(26) Install third gear needle bearing on shaft (Fig.
68).
Fig. 68 Third Gear Bearing
1 - THIRD GEAR BEARING
(27) Install third gear on shaft and bearing (Fig.
69).
Fig. 69 Third Gear
1 - THIRD GEAR
2 - BEARING
(28) Install third speed synchro ring on third gear
(Fig. 70).
(29) Assemble 3-4 synchro hub, sleeve, springs,
struts and detent balls.
Fig. 70 Third Gear Synchro Ring
1 - THIRD SPEED SYNCHRO RING
2 - THIRD GEAR
CAUTION: The 3-4 synchro hub and sleeve can be
installed backwards if care is not exercised. One
side of the sleeve has grooves in it, this side of
sleeve faces the front of the shaft.
(30) Start 3-4 synchro hub on output shaft splines
by hand (Fig. 71).
Fig. 71 3-4 Synchro Hub On Output Shaft
1 - GROOVED SIDE OF SLEEVE
2 - 3-4 SYNCHRO ASSEMBLY
BR/BE