Dodge 2001 Ram 1500 Owner's Manual page 2509

21 - 874 TRANSFER CASE - NV241LD
TRANSFER CASE - NV241LD (Continued)
(3) Install brass stop ring on drive sprocket (Fig.
62).
Fig. 62 Synchronizer Stop Ring Installation
1 - BRASS STOP RING
2 - DRIVE SPROCKET
(4) Install 3 synchronizer struts and 2 springs in
hub as follows:
(a) Insert first strut in hub (Fig. 63). Strut
shoulders rest (and slide) on sides hub slot as
shown.
Fig. 63 Installing First Synchronizer Strut And
1 - FIRST STRUT
2 - SYNCHRONIZER HUB
3 - SPRING
Spring
(b) Insert hooked end of first spring in center of
strut to secure it. Then work spring into hub (Fig.
64).
(c) Press spring inward and insert last two
struts in hub slots. Be sure spring is positioned
under struts to properly secure them (Fig. 65).
(d) Turn hub over and install remaining spring
in hub. Position hooked end of second spring oppo-
site the first spring's hooked end.
Fig. 64 Synchronizer Spring Installation
1 - STRUT SHOULDER
2 - SPRING (SEATED IN STRUT)
3 - HUB
Fig. 65 Correct Position Of Struts And Springs
1 - STRUTS
2 - SPRING
BR/BE