Dodge 2001 Ram 1500 Owner's Manual page 2184

BR/BE
FRONT CLUTCH (Continued)
DISASSEMBLY
(1) Remove the waved snap-ring, reaction plate,
clutch plates, and clutch discs.
(2) Compress clutch piston retainer and piston
springs with Compressor Tool C-3863-A (Fig. 94).
(3) Remove retainer snap-ring and remove com-
pressor tool.
(4) Remove clutch piston springs (Fig. 95). Note
position of piston springs for assembly reference.
(5) Remove clutch piston from retainer with a
twisting motion.
(6) Remove and discard clutch piston inner and
outer seals.
(7) Assemble Tool Handle C-4171 and Bushing
Remover SP-3629 (Fig. 96).
(8) Insert remover tool in bushing and drive bush-
ing straight out of clutch retainer.
1 - INNER PISTON SEAL
2 - CLUTCH PISTON
3 - CLUTCH PISTON SPRING RETAINER
4 - CLUTCH PLATES
5 - CLUTCH PACK SNAP-RING (WAVED)
6 - REACTION PLATE
AUTOMATIC TRANSMISSION - 46RE
Fig. 94 Removing Front Clutch Spring Retainer
1 - SPECIAL TOOL C-3863-A
2 - SNAP-RING
Fig. 95 Front Clutch Components
7 - CLUTCH DISCS
8 - RETAINER SNAP-RING
9 - CLUTCH PISTON SPRINGS (9)
10 - OUTER PISTON SEAL
11 - FRONT CLUTCH RETAINER
Snap-Ring
21 - 549