Dodge 2001 Ram 1500 Owner's Manual page 1742

BR/BE
MANUAL - NV5600 (Continued)
Fig. 44 FIFTH COUNTERSHAFT GEAR
1 - GUIDE 8235
2 - FIFTH COUNTER SHAFT GEAR
3 - FIXTURE 8227
Fig. 45 SIXTH COUNTERSHAFT GEAR
1 - GUIDE 8235
2 - SIXTH COUNTER SHAFT GEAR
3 - FIXTURE 8227
MANUAL - NV5600
(7) Remove fourth countershaft gear, friction cone,
blocker ring and bearing from the countershaft (Fig.
46).
Fig. 46 FOURTH COUNTERSHAFT GEAR
1 - FOURTH GEAR BLOCKER RING
2 - FOURTH GEAR BEARING
3 - COUNTERSHAFT
4 - FOURTH GEAR FRICTION CONE
5 - FOURTH COUNTERSHAFT GEAR
(8) Install countershaft into Fixture 8227 with
press blocks located under the third countershaft
gear
(9) Place assembly into a shop press and press
third countershaft gear, 3-4 synchro, and fourth
countershaft gear bearing sleeve from the counter-
shaft (Fig. 47).
(10) Remove countershaft from the press and Fix-
ture 8227.
(11) Remove third countershaft gear bearing from
the countershaft (Fig. 48).
(12) The 2-3 thrust washer should not normally
need to be removed from the countershaft. If neces-
sary slid 2-3 thrust washer off countershaft.
21 - 107