Dodge 2001 Ram 1500 Owner's Manual page 1673

21 - 38 MANUAL - NV3500
MANUAL - NV3500 (Continued)
Fig. 113 Shift Shaft Bushing Lock Bolt
1 - SHIFT SHAFT LOCK BOLT
2 - SHAFT SOCKET
Fig. 114 Shift Shaft Detent Plunger
1 - FRONT HOUSING
2 - PLUG
3 - SPRING
4 - PLUNGER
Fig. 115 Backup Light Switch
1 - BACKUP LIGHT SWITCH
(17) Install input shaft snap ring (Fig. 116).
Fig. 116 Shaft Snap Ring - Typical
1 - INPUT SHAFT SNAP RING
(18) Install new oil seal in front bearing retainer
with Installer 6448 (Fig. 117).
Fig. 117 Oil Seal In Front Bearing Retainer
1 - INSTALLER 6448
2 - FRONT BEARING RETAINER
(19) Apply bead of Mopar silicone sealer or equiv-
alent to flange surface of front bearing retainer (Fig.
118).
(20) Align and install front bearing retainer over
input shaft and onto housing mounting surface (Fig.
119). Verify bolt holes are aligned before seating
retainer.
CAUTION: Be sure sealer does not get into the oil
feed hole in the transmission case or bearing
retainer.
BR/BE