Dodge 2001 Ram 1500 Owner's Manual page 2534

BR/BE
TRANSFER CASE - NV241HD (Continued)
MAINSHAFT
(1) Remove retaining ring that secures synchro-
nizer hub on mainshaft (Fig. 23). Use standard
(instead of parallel jaw) snap-ring pliers to remove
this retaining ring.
Fig. 23 Synchronizer Hub Retaining Ring Removal
1 - SYNCHRONIZER HUB
2 - RETAINING RING
(2) Remove synchronizer hub (Fig. 24).
Fig. 24 Synchronizer Hub Removal
1 - SYNCHRONIZER HUB
2 - MAINSHAFT
(3) Inspect synchronizer hub struts and springs. If
struts appear worn, remove struts and springs from
hub. Note position of springs for installation refer-
ence (Fig. 25).
(4) Remove brass stop ring (Fig. 26). Discard stop
ring if worn, cracked, or any teeth are missing.
(5) Remove drive sprocket (Fig. 27).
TRANSFER CASE - NV241HD
Fig. 25 Synchronizer Strut And Spring Removal
1 - SYNCHRONIZER STRUTS
2 - SYNCHRONZER HUB
3 - SYNCHRONIZER SPRINGS
Fig. 26 Synchronizer Stop Ring Removal
1 - DRIVE SPROCKET
2 - STOP RING
Fig. 27 Drive Sprocket Removal
1 - DRIVE SPROCKET
2 - MAINSHAFT
21 - 899